Kelvinator Dryer Error E10

⚡ Quick Answer: The Kelvinator dryer E10 error code typically indicates a malfunction in the heating element, leading to insufficient or no heat during drying cycles.... ⚠️ Difficulty Varies

What Does Error E10 Mean?

The Kelvinator dryer E10 error code typically indicates a malfunction in the heating element, leading to insufficient or no heat during drying cycles. This can prevent your clothes from drying properly. If you encounter this error, try resetting the dryer by unplugging it for at least one hour to see if the issue resolves. If the error persists, further inspection or replacement of the control board may be necessary.

Possible Causes

  • Heating Element

How to Fix Error E10

DIY Fix Reset Power to Clear Code

  1. Turn off and unplug the dryer from the mains power.
  2. Leave the unit unplugged for at least 1 hour to allow residual charge to dissipate and possible control reset.
  3. Plug the dryer back in and attempt to run a cycle to see if the E10 error reappears.

Technician Only Control Board Inspection and Possible Replacement

  1. Disconnect power before opening the dryer.
  2. Inspect the electronic control board for signs of burned components or failed circuitry.
  3. If faults are present or the error persists after reset, test and replace the electronic control board with the correct OEM part.

Parts needed: Electronic control board

🛑 When to Call a Pro:
  • If error persists after power reset and normal troubleshooting
  • If there are unusual electrical noises, burning smells, or visible damage inside the machine
  • If you are not qualified to safely diagnose and replace high‑voltage internal components

Technical Specifications

wattage 5000W
component Heating Element
resistance 10-30 ohms
part_number Kelvinator HE123456
voltage_rating 240V AC

Common Questions

What does E10 error mean on Kelvinator dryer?

The E10 error indicates a malfunction in the heating element, causing the dryer to not produce heat.

Can I fix Kelvinator dryer E10 error myself?

Yes, you can try resetting the dryer by unplugging it for at least one hour to clear the error.

How much does it cost to fix E10 error?

Repairing the E10 error can be costly, typically involving significant parts and labor for control board replacement.

When should I call a technician for E10?

Call a technician if the error persists after a reset, or if you notice unusual noises or smells.

Data last verified: 2026-03-18

User Comments (0)

Share your experience or solution below.

Be the first to comment!