Kelvinator Air Conditioner Error EE

⚡ Quick Answer: The EE error code on your Kelvinator Air Conditioner indicates a malfunction in the control board's EEPROM memory, leading to erratic temperature read... ✅ DIY Fixable

What Does Error EE Mean?

The EE error code on your Kelvinator Air Conditioner indicates a malfunction in the control board's EEPROM memory, leading to erratic temperature readings and possible operational failures. This issue can cause the unit to stop working or enter fault protection mode, often accompanied by specific LED flash sequences. A power cycle may momentarily reset the error, but persistent issues typically require professional repair.

Common Symptoms:

  • Unit displays EE on panel
  • AC stops operating or enters fault protection
  • May flash LEDs in a specific sequence indicating EEPROM fault

Possible Causes

  • EEPROM memory malfunction on control board (medium)

How to Fix Error EE

DIY Fix Power cycle the unit and check connections

  1. Turn off the air conditioner using remote and wall isolator switch
  2. Disconnect power at the breaker or mains for at least 5–10 minutes to remove residual charge
  3. Reconnect and power on to see if the EE error resets

Technician Only Inspect and repair control board EEPROM / replace PCB

  1. Isolate and remove the outdoor/main control PCB
  2. Inspect the EEPROM solder joints and related components for damage or poor connections
  3. If EEPROM is confirmed faulty or cannot be reprogrammed, replace the control board assembly with a correct OEM part

Parts needed: Control board (main PCB), EEPROM memory chip (if separately replaceable)

🛑 When to Call a Pro:
  • If EEPROM fault persists after power reset
  • If disassembly or PCB handling is required
  • If unit continues failing to start and shows EE repeatedly

Next step

Choose the next step for EE

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

HVAC Control Board

Controls fan, compressor, sensor, and communication functions in the HVAC unit.

Typical part-only price
$90 - $320
DIY difficulty
Hard
Estimated time
45-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 5-10 kOhms
part_number KAC-SENSOR-001
voltage_rating 220V AC

Common Questions

What does EE error mean on Kelvinator Air Conditioner?

The EE error indicates a malfunction in the control board's EEPROM, causing erratic temperature readings.

Can I fix Kelvinator Air Conditioner EE error myself?

Yes, you can try power cycling the unit and checking connections to see if the error resets.

How much does it cost to fix EE error?

Repair costs for the EE error can range from $100 to $400+, depending on the unit and region.

When should I call a technician for EE?

Call a technician if the EE error persists after a power reset or if you need to disassemble the unit.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!