Kelvinator Air Conditioner Error E8

⚡ Quick Answer: The Kelvinator air conditioner E8 error indicates that the unit has triggered overload protection due to high temperature or a compressor overload. Th... ✅ DIY Fixable

What Does Error E8 Mean?

The Kelvinator air conditioner E8 error indicates that the unit has triggered overload protection due to high temperature or a compressor overload. This often results in the unit stopping cooling and may produce unusual humming sounds. The indoor and outdoor fans may also cease operation, causing the system to shut down shortly after starting.

Common Symptoms:

  • Unit displays E8 and stops cooling
  • Indoor/outdoor fan may stop or not spin
  • Unit may shut down shortly after startup due to overload protection

Possible Causes

  • Overload or anti‑high‑temperature protection triggered (medium)

How to Fix Error E8

DIY Fix Basic checks and power reset

  1. Turn off the AC unit using the remote or wall switch
  2. Disconnect main power switch or unplug the unit
  3. Wait several minutes to allow protective circuits to reset
  4. Reconnect power and restart the unit

Technician Only Technical diagnosis and repair

  1. Inspect indoor and outdoor fan motors and remove obstructions
  2. Measure motor current and check for motor winding faults
  3. Inspect airflow paths and clean coils and filters
  4. Verify refrigerant circuit and temperature sensors
  5. Check control boards and communication wiring for faults and replace faulty components if necessary

Parts needed: Fan motor assembly, Airflow filters and coils, Temperature sensors, Control PCB and communication wiring

🛑 When to Call a Pro:
  • If error persists after basic reset
  • If unit overheats, emits unusual noises, smoke, or burning smell
  • If fan motors do not spin or airflow is severely restricted

Next step

Choose the next step for E8

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

HVAC Control Board

Controls fan, compressor, sensor, and communication functions in the HVAC unit.

$90 - $320 · Hard · 45-120 mins

Check fit & price
Model number required

Model-compatible Air Conditioner parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Air Conditioner Fin Cleaner

For routine cleaning of accessible coil fins when permitted by the manufacturer. Disconnect power and follow product and appliance instructions.

View maintenance supply
Maintenance supply

Model-Compatible Washable AC Filter

A reusable filter option only where the appliance supports one. Match the full model, dimensions, and filter specification.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 2000W
component Compressor
resistance 5-10 ohms
part_number KAC-COMP-001
voltage_rating 230V AC

Common Questions

What does E8 error mean on Kelvinator air conditioner?

E8 error indicates a compressor overload, leading to the unit stopping cooling and potentially unusual humming sounds.

Can I fix Kelvinator air conditioner E8 error myself?

Yes, you can try resetting the unit by turning it off, disconnecting power, and waiting a few minutes.

How much does it cost to fix E8 error?

Repair costs for the E8 error range from ¥10,000 to ¥60,000+, depending on parts and labor.

When should I call a technician for E8?

Call a technician if the error persists after a reset, or if you notice overheating, unusual noises, or restricted airflow.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!