JennAir Refrigerator Error PO
⚡ Quick Answer: The JennAir Refrigerator PO error indicates a power outage or loss of electrical supply. This code appears when the freezer temperature rises above 18... ✅ DIY Fixable
What Does Error PO Mean?
The JennAir Refrigerator PO error indicates a power outage or loss of electrical supply. This code appears when the freezer temperature rises above 18°F due to power loss. Users may notice the 'PO' displayed on the control panel and unusual sounds from the compressor. Allow the refrigerator time to recover after power restoration to return to normal temperature.
Common Symptoms:
- "PO" displayed on control panel
- Recent loss of power or disconnection
- Freezer temperature higher than normal after power restoration
Possible Causes
- Recent power outage or loss of electrical supply (high)
- Freezer temperature rise due to power loss (high)
How to Fix Error PO
DIY Fix Confirm recent power outage and allow recovery
- Verify if there was a recent power outage or disconnection of the refrigerator’s power supply.
- Check that the refrigerator is plugged in firmly and receiving power.
- Allow the refrigerator time (several hours) to return to normal temperature after power restoration.
Technician Only Verify electrical supply and temperature recovery
- Check electrical supply to the refrigerator including outlet and circuit breaker.
- Measure freezer and refrigerator compartment temperatures to ensure returning to specified range.
- Inspect for any damage or unstable power issues that may cause repeated outages.
- If the PO code persists after allowing adequate recovery time or if other error codes appear concurrently.
- If refrigerator fails to return to normal operating temperatures after several hours.
Next step
Choose the next step for PO
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Compressor
Compresses refrigerant within the sealed cooling system and requires specialized service equipment.
- Typical part-only price
- $180 - $600
- DIY difficulty
- Hard
- Estimated time
- 120-240 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Condenser Coil Assembly
Releases heat from the refrigerant circuit and must match the appliance's sealed-system design.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 200W |
|---|---|
| component | Compressor |
| resistance | 3-5 ohms |
| part_number | W10309969 |
| voltage_rating | 120V AC |
Common Questions
What does PO error mean on JennAir Refrigerator?
The PO error indicates a power outage, causing the freezer temperature to rise above 18°F.
Can I fix JennAir Refrigerator PO error myself?
Yes, confirm the power supply and allow the refrigerator time to recover after a power outage.
How much does it cost to fix PO error?
Repair costs vary by model and region.
When should I call a technician for PO?
Call a technician if the PO code persists after recovery or if other error codes appear.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!