Insignia Refrigerator Error LED-1-AND-LED-2-LIT

⚡ Quick Answer: The Insignia refrigerator error code LED-1-AND-LED-2-LIT indicates a malfunction in the refrigerator's temperature sensor circuit. This error is often... ✅ DIY Fixable

What Does Error LED-1-AND-LED-2-LIT Mean?

The Insignia refrigerator error code LED-1-AND-LED-2-LIT indicates a malfunction in the refrigerator's temperature sensor circuit. This error is often accompanied by both LED indicators on the control panel being lit simultaneously, which may signal temperature control issues such as inaccurate cooling or failure to maintain the desired temperature. Addressing this issue quickly is essential to avoid food spoilage.

Common Symptoms:

  • LED 1 and LED 2 on the control panel are both lit simultaneously
  • Potential temperature control issues (e.g., inaccurate temperature or failure to cool)

Possible Causes

  • Temperature sensor circuit malfunction (high)

How to Fix Error LED-1-AND-LED-2-LIT

DIY Fix Verify basic operating conditions & reset

  1. Ensure the refrigerator is plugged in securely and receiving power
  2. Check that the thermostat control is set properly (not in standby)
  3. Allow time for the unit to stabilize after power interruptions

Technician Only Inspect and test the refrigerator temperature sensor circuit

  1. Disconnect power to the refrigerator.
  2. Locate the refrigerator temperature sensor (often near the evaporator or control board, per model manual).
  3. Test sensor resistance with a multimeter according to manufacturer specifications.
  4. Check wiring harness and connections for damage or corrosion.
  5. Replace the temperature sensor or repair wiring if faulty.

Parts needed: Temperature sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If error persists after basic reset and checks
  • If there is uncertainty diagnosing electrical components

Next step

Choose the next step for LED-1-AND-LED-2-LIT

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 200W
component Compressor
resistance 3-5 ohms
part_number W10662129
voltage_rating 120V AC

Common Questions

What does LED‑1‑AND‑LED‑2‑LIT error mean on Insignia refrigerator?

It indicates a malfunction in the temperature sensor circuit, causing both LEDs to light up.

Can I fix Insignia refrigerator LED‑1‑AND‑LED‑2‑LIT error myself?

Yes, verify power connections, ensure the thermostat is set correctly, and allow time for stabilization.

How much does it cost to fix LED‑1‑AND‑LED‑2‑LIT error?

Repair costs range from $30 to $150 for parts, plus labor, based on technician rates.

When should I call a technician for LED‑1‑AND‑LED‑2‑LIT?

If the error persists after a reset or if you are unsure about diagnosing electrical components.

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!