Insignia Dishwasher Error E1
⚡ Quick Answer: The Insignia dishwasher E1 error indicates a drainage issue, primarily due to insufficient water flow or improper water fill. This could be caused by ... ✅ DIY Fixable
What Does Error E1 Mean?
The Insignia dishwasher E1 error indicates a drainage issue, primarily due to insufficient water flow or improper water fill. This could be caused by a blocked drain hose, a malfunctioning float sensor, or inadequate water supply. Users may notice that the dishwasher starts its cycle but quickly stops or displays a humming sound. To resolve this, check the water supply, inspect the drain hose for clogs, and ensure the float sensor is functioning correctly.
Common Symptoms:
- Dishwasher starts cycle but stops soon after and displays E1
- Dishwasher beeps for 1–3 minutes before showing E1 if water flow is inadequate
- No sufficient water entering the tub
Possible Causes
- Insufficient water flow / water supply not reaching dishwasher (high)
- Restricted or clogged drain hose impeding correct fill/drain detection (medium)
- Float/level sensor or float mechanism malfunction (medium)
How to Fix Error E1
DIY Fix Check and ensure proper water supply
- Ensure the water supply faucet feeding the dishwasher is fully open
- Inspect the inlet hose for kinks, blockages, or damage
- Verify home water pressure is within acceptable range
DIY Fix Inspect drain hose and filter
- Remove and clean dishwasher filter to eliminate debris
- Check the drain hose for kinks or obstructions and straighten/clear if needed
- Ensure drain hose is properly installed without sharp bends
Technician Only Inspect or replace float/level sensor assembly
- Disconnect power and water supply
- Remove dishwasher toe kick and access base pan
- Inspect float assembly and sensor for proper movement and continuity
- Replace faulty float assembly/level sensor if necessary
Parts needed: float sensor/assembly, float switch, possibly related wiring harness
- If water supply and hose checks do not resolve E1
- If float sensor or water inlet valve appears damaged and beyond basic inspection
- If there is water leakage under dishwasher base
Next step
Choose the next step for E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Float Switch
Detects the maximum water level to prevent overflow and potential flooding.
- Typical part-only price
- $15 - $40
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | NS-DW2S1-PUMP |
| voltage_rating | 120V AC |
Common Questions
What does E1 error mean on Insignia dishwasher?
E1 error indicates a drainage issue due to insufficient water flow or fill problems.
Can I fix Insignia dishwasher E1 error myself?
Yes, check the water supply and drain hose for clogs or kinks.
How much does it cost to fix E1 error?
Repair costs for E1 error range from $40 to $120 for parts.
When should I call a technician for E1?
Call a technician if checks do not resolve E1 or if components appear damaged.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!