Ilve Oven Error F13

⚡ Quick Answer: The Ilve oven error code F13 suggests a malfunction in the temperature sensor, which can lead to erratic temperature readings and inconsistent cooking... ✅ DIY Fixable

What Does Error F13 Mean?

The Ilve oven error code F13 suggests a malfunction in the temperature sensor, which can lead to erratic temperature readings and inconsistent cooking results. This issue may be related to control electronics or a system fault. Users should initially try a basic power reset to see if the error clears. If the problem persists, it’s advisable to contact Ilve service for further assistance.

Possible Causes

  • Temperature Sensor

How to Fix Error F13

DIY Fix Basic reset and check power

  1. Disconnect the oven from power (unplug or switch off breaker).
  2. Wait at least 30 seconds.
  3. Reapply power and see if the error clears.
🛑 When to Call a Pro:
  • If the error persists after power reset and normal operation doesn’t resume, discontinue use and contact Ilve service — no verified Ilve-specific procedures available.

Next step

Choose the next step for F13

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-2000 ohms
part_number ILVE-TEMP-SENSOR-001
voltage_rating 240V AC

Common Questions

What does F13 error mean on Ilve oven?

F13 indicates a malfunction in the temperature sensor, leading to erratic readings.

Can I fix Ilve oven F13 error myself?

Yes, try a basic power reset by disconnecting the oven for 30 seconds.

How much does it cost to fix F13 error?

Repair costs vary by model and region; consult a technician for estimates.

When should I call a technician for F13?

Call a technician if the error persists after a power reset.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!