Ilve Gas Cooktop Error F10

⚡ Quick Answer: The Ilve gas cooktop F10 error indicates an ignition failure, which may present as clicking sounds without the burner igniting or an accompanying gas ... ✅ DIY Fixable

What Does Error F10 Mean?

The Ilve gas cooktop F10 error indicates an ignition failure, which may present as clicking sounds without the burner igniting or an accompanying gas smell. This error suggests that the cooktop is not igniting as it should, potentially due to issues with the ignition system. To address this, users can consult their model manual for definitions, perform a power cycle by turning off the gas and electrical power for 1-2 minutes, and check if the error persists.

Possible Causes

  • Ignition electrode
  • Gas supply issue
  • Control module malfunction

How to Fix Error F10

DIY Fix Check documentation and reset

  1. Consult your specific Ilve model manual for error code definitions where available.
  2. Power cycle the cooktop: turn off gas and electrical power for 1–2 minutes, then restore.
  3. Observe if the code persists.

Technician Only Contact Ilve service support

  1. Provide the exact model number and description of when the F10 appears.
  2. Request official error code interpretation from Ilve technical support or authorized service agent.
  3. Have a technician inspect diagnostic outputs and error logs if available.
🛑 When to Call a Pro:
  • If the F10 error persists after basic reset and power cycling, or if any other unusual behavior (gas smell, ignition failure) accompanies it.

Next step

Choose the next step for F10

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Spark Igniter

Generates a spark to light the gas burner in gas heating appliances.

Typical part-only price
$15 - $40
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Ignition Electrode
resistance 1-5 ohms
part_number ILVE-IGN-001
voltage_rating 120V AC

Common Questions

What does F10 error mean on ilve gas cooktop?

The F10 error indicates an ignition failure, often resulting in clicking sounds without ignition or a gas smell.

Can I fix ilve gas cooktop F10 error myself?

Yes, you can check your model manual, reset the cooktop, and power cycle it to see if the error resolves.

How much does it cost to fix F10 error?

Repair costs for the F10 error can vary by model and region; consulting a technician will provide a better estimate.

When should I call a technician for F10?

If the F10 error persists after performing a reset and power cycle, or if you notice any gas smell or other unusual behaviors.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!