Ilve Freestanding Cooker Error F15

⚡ Quick Answer: The F15 error code on your Ilve freestanding cooker indicates a potential malfunction in the temperature sensor, which may lead to inaccurate temperat... ✅ DIY Fixable

What Does Error F15 Mean?

The F15 error code on your Ilve freestanding cooker indicates a potential malfunction in the temperature sensor, which may lead to inaccurate temperature readings or inconsistent display values. In such cases, the cooker may not operate effectively, affecting cooking results. If you encounter this error, it is advisable to perform a power cycle by turning off the cooker at the mains supply, waiting for at least 60 seconds, and then restoring power to see if the error returns.

Possible Causes

  • Temperature Sensor

How to Fix Error F15

DIY Fix Basic checks due to lack of Ilve‑specific documentation

  1. Turn off the cooker at the mains supply and wait at least 60 seconds.
  2. Restore power and see if the F15 code returns.
  3. Ensure that all knobs and controls are in the OFF position before restarting.
  4. Document exactly when (e.g., during start, heating, after power interruption) the code appears.
  5. Prepare this information for a technician.

Technician Only Contact Ilve authorised service

  1. Provide the documented conditions under which F15 appears (when it shows on display, frequency, any preceding events).
  2. Technician should consult Ilve service literature or direct manufacturer support for F15 specifics.
  3. Diagnose using official diagnostic tools/manuals not publicly available.
🛑 When to Call a Pro:
  • If F15 persists after power cycling.
  • If the cooker cannot be used safely (e.g., no heating, control interface locked).
  • If there are any signs of electrical faults (smoke, burning smell, repeated resets).

Next step

Choose the next step for F15

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 10-30 ohms
part_number ILVE TS-001
voltage_rating 240V AC

Common Questions

What does F15 error mean on Ilve freestanding cooker?

F15 indicates a malfunction in the temperature sensor, leading to erratic temperature readings.

Can I fix Ilve freestanding cooker F15 error myself?

Yes, try power cycling the cooker by turning it off and on after 60 seconds.

How much does it cost to fix F15 error?

Repair costs vary by model and region; consult a technician for estimates.

When should I call a technician for F15?

Call if the F15 error persists after power cycling or if the cooker shows signs of electrical fault.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!