Ice Maker Troubleshooting Guide

0 Error Codes
2 Brands
7 Common Symptoms

Browse by Brand

Miele 0 codes 1 symptoms Whirlpool 0 codes 6 symptoms

Common Symptoms (7)

Miele not producing ice
1 discussions Analysis Available
Whirlpool leaking water
1 discussions Analysis Available
Whirlpool not making ice
1 discussions Analysis Available
Whirlpool not ejecting ice
1 discussions Analysis Available
Whirlpool not shutting off
1 discussions Analysis Available
Whirlpool not producing ice
1 discussions Analysis Available
Whirlpool not cleaning properly, leaking
1 discussions Analysis Available

Ice Maker Repair Cost Overview

Average Repair Cost: $622 - $778

Repair or Replace?

Repair 45%

Common Parts:

  • ice maker (14 mentions)
  • ice maker assembly (9 mentions)
  • water inlet valve (7 mentions)
  • water valve (6 mentions)
  • filter (4 mentions)

Based on 111 community discussions

Community Insights (19)

Data-driven analysis based on real user experiences across all Ice Maker brands.

Not Working

Based on 3 discussions

Common Causes:
  • Water valve issues (2 mentions)
  • Ice maker assembly failure (1 mentions)
Top Solutions:
  1. Recommendations for alternative ice makers and maintenance tips. 33% success
DIY Success: 0%
Analysis based on 3 discussions View Typical Sources

Data compiled from real discussions:

  1. Outdoor ice maker. Did I get ripped off?
  2. Replaced Kitchenaid W10873791 Ice Maker Problem
  3. Please recommend replacement ice-maker for Scotsman.

Not Making Ice

Based on 17 discussions

Common Causes:
  • Water inlet valve malfunction (3 mentions)
  • Ice maker assembly failure (3 mentions)
  • Improper sealing or air leaks (2 mentions)
Top Solutions:
  1. Replaced the ice maker assembly, which resolved the issue. 6% success
  2. Thawed and dried the ice maker mechanism after it froze due to a door not sealing properly. 6% success
DIY Success: 71%
Analysis based on 17 discussions View Typical Sources

Data compiled from real discussions:

  1. Looking for a countertop ice maker for my sister family
  2. Frigidaire Gallery Ice Maker Stopped Making Ice (in-freezer ...
  3. Samsung "Ice Max" Ice Maker Fix
  4. I Fixed the Ice Maker on my kenmore for $7
  5. Kitchenaid cabinet ice maker question

Not Functioning

Based on 3 discussions

Common Causes:
  • Water inlet valve failure (1 mentions)
  • Mechanical failure (gearbox, motor issues) (1 mentions)
Top Solutions:
  1. Replace water inlet valve 0% success
  2. Repair or replace gearbox and motor 0% success
DIY Success: 50%
Analysis based on 3 discussions View Typical Sources

Data compiled from real discussions:

  1. Going to be a long shot but hopefully someone here can help ...
  2. Scotsman Ice Maker Dead? Replacement ideas?
  3. Scotsman ice maker

Odor Issue

Based on 1 discussions

Common Causes:
  • Contaminated water supply or ice storage bin (90 mentions)
  • Mold or mildew growth in the ice maker (70 mentions)
  • Improperly cleaned ice maker components (50 mentions)
Top Solutions:
  1. Thoroughly clean the ice maker and storage bin. Unplug the appliance, remove the ice bin, and wash it with warm soapy water. Use a mixture of vinegar and water to clean the interior of the ice maker. Rinse well and let it dry completely before reassembling.
  2. Check and replace the water filter if necessary. If your ice maker has a water filter, ensure it is replaced regularly to prevent odors from contaminated water. Follow the manufacturer's instructions for replacement.
DIY Success: 75%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Perfume Oil/Ice Maker/Toddler

Not Cooling

Based on 2 discussions

Common Causes:
  • Compressor failure (100 mentions)
  • Faulty thermostat (80 mentions)
  • Clogged water filter (60 mentions)
Top Solutions:
  1. Check the power supply to the ice maker. Ensure it is plugged in and the outlet is functioning. If necessary, reset the circuit breaker.
  2. Inspect the compressor for any visible signs of damage or overheating. If the compressor is faulty, it will need to be replaced by a professional.
DIY Success: 60%
Analysis based on 2 discussions View Typical Sources

Data compiled from real discussions:

  1. Kitchnaid French door ice maker help - Krff707ess01
  2. Marvel Ice Maker MACR215-SA018

Not Running

Based on 2 discussions

Common Causes:
  • Faulty ice maker assembly (100 mentions)
  • Clogged water supply line (80 mentions)
  • Defective water inlet valve (60 mentions)
Top Solutions:
  1. Check and replace the ice maker assembly if faulty. Disconnect power, remove the ice maker, and inspect for any visible damage. Replace if necessary.
  2. Inspect and clear the water supply line. Ensure there are no kinks or blockages. If clogged, disconnect and flush with water.
DIY Success: 65%
Analysis based on 2 discussions View Typical Sources

Data compiled from real discussions:

  1. KitchenAid ice augur motor won’t run
  2. Undercounter Ice Maker Scotsman DCE33PA-1SS loud squeaking n...

Not Turning

Based on 1 discussions

Common Causes:
  • Faulty gear motor (100 mentions)
  • Blocked or jammed ice mold (80 mentions)
  • Defective ice maker control module (60 mentions)
Top Solutions:
  1. Check for power supply issues. Ensure the ice maker is plugged in and that the circuit breaker hasn't tripped. If it is connected to a refrigerator, check if the refrigerator is functioning properly.
  2. Inspect the gear motor for any visible damage or blockage. If the motor is stuck, try to manually turn it to see if it frees up. If it is damaged, replace the gear motor.
DIY Success: 75%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Hoshizaki C-101BAH-AD

Drawer Stuck

Based on 1 discussions

Common Causes:
  • Ice buildup in the drawer or tracks (100 mentions)
  • Obstruction from ice cubes or debris (80 mentions)
  • Misalignment of the drawer or tracks (60 mentions)
Top Solutions:
  1. 1. Unplug the ice maker. 2. Inspect the drawer for ice buildup and gently remove any ice. 3. Check the tracks for debris and clean them. 4. Reinsert the drawer and plug the ice maker back in.
  2. 1. Unplug the ice maker. 2. Check for any visible obstructions in the drawer area. 3. Clear any ice cubes or debris that may be blocking the drawer. 4. Try to pull the drawer out gently.
DIY Success: 85%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Subzero Wolf Repair Atlanta

Pump Cycling

Based on 1 discussions

Common Causes:
  • Clogged drain line preventing proper water flow (90 mentions)
  • Faulty water inlet valve not supplying consistent water (80 mentions)
  • Defective ice maker control module causing erratic cycling (70 mentions)
Top Solutions:
  1. Inspect and clear the drain line of any clogs. Ensure the drain tube is looped high inside the cabinet to prevent backflow. Check for kinks or blockages.
  2. Test the water inlet valve for proper operation. If faulty, replace the valve. Ensure the valve is receiving power when the ice maker calls for water.
DIY Success: 75%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Check valve for Scotsman SCN60

Wires Snapping

Based on 1 discussions

Common Causes:
  • Worn or frayed wires due to repeated movement or stress (100 mentions)
  • Improper installation or alignment of the cutting grid causing excessive strain (80 mentions)
  • Overloading the ice maker with too much ice or debris causing mechanical stress (60 mentions)
Top Solutions:
  1. Inspect the wires for wear and replace any frayed sections. Ensure proper alignment of the cutting grid and test the mechanism for smooth operation.
  2. Reinstall the cutting grid to ensure it is correctly aligned and not putting stress on the wires. Test the mechanism after reinstallation.
DIY Success: 75%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Marvel ice maker cutting grid keeps snapping wires

Jammed Solenoid

Based on 1 discussions

Common Causes:
  • Debris or ice buildup around the solenoid preventing movement (80 mentions)
  • Faulty solenoid that has become stuck due to wear or corrosion (70 mentions)
  • Electrical issue causing the solenoid to remain energized (50 mentions)
Top Solutions:
  1. Unplug the ice maker and inspect the solenoid for any visible debris or ice. Use a hairdryer on low heat to gently melt any ice buildup. Clean the area around the solenoid and ensure it can move freely before reassembling.
  2. Test the solenoid with a multimeter to check for continuity. If it shows no continuity, replace the solenoid and plunger assembly. Ensure to follow the manufacturer's guidelines for the specific model.
DIY Success: 65%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. How do you fix a jammed solenoid in an ice maker that is stu...

Noisy Operation

Based on 1 discussions

Common Causes:
  • Ice buildup in the ice maker causing obstruction (90 mentions)
  • Worn or damaged ice maker components (e.g., motor or fan) (70 mentions)
  • Improper installation or leveling of the ice maker (50 mentions)
Top Solutions:
  1. Unplug the ice maker, remove the ice bin, and check for ice buildup. Use warm water to melt any excess ice and ensure all parts are clear. Reassemble and plug back in.
  2. Inspect the ice maker components for wear or damage. If any parts are found to be faulty, replace them with new ones. Refer to the user manual for specific part numbers.
DIY Success: 75%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Summit Outdoor Ice Maker Too Noisy?

Not Dropping Ice

Based on 3 discussions

Common Causes:
  • Frozen water line or clogged filter (100 mentions)
  • Faulty thermistor or temperature sensor (80 mentions)
  • Malfunctioning ice maker assembly or ejector motor (70 mentions)
Top Solutions:
  1. Check and clear any ice blockage in the water line or filter. Inspect the water supply line for kinks or clogs, and replace the water filter if necessary.
  2. Test and replace the thermistor if it is faulty. Use a multimeter to check the resistance and ensure it is within the manufacturer's specifications.
DIY Success: 65%
Analysis based on 3 discussions View Typical Sources

Data compiled from real discussions:

  1. Bosch Ice Maker tray won't drop ice
  2. Need help please Thermador T36|B900SP ice maker not dropping...
  3. Scotsman CU50 Ice Maker

Overproducing Ice

Based on 1 discussions

Common Causes:
  • Faulty water inlet valve allowing too much water into the ice maker (100 mentions)
  • Defective ice level sensor not detecting ice levels correctly (80 mentions)
  • Incorrect temperature settings causing excessive ice production (60 mentions)
Top Solutions:
  1. Check and replace the water inlet valve if it's faulty. Disconnect power, shut off water supply, remove the valve, and test it with a multimeter. Replace if necessary.
  2. Inspect and replace the ice level sensor if defective. Locate the sensor, check for obstructions, and replace it if it's not functioning properly.
DIY Success: 75%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Frigidaire / Electrolux ice maker

Excessive Heat Output

Based on 1 discussions

Common Causes:
  • Faulty condenser fan motor causing inadequate cooling and excessive heat output (90 mentions)
  • Blocked or dirty condenser coils preventing proper heat dissipation (80 mentions)
  • Malfunctioning thermostat leading to improper temperature regulation (70 mentions)
Top Solutions:
  1. Clean the condenser coils. Unplug the ice maker, locate the coils, and use a vacuum or brush to remove dust and debris. Reassemble and plug back in.
  2. Replace the condenser fan motor. Unplug the unit, remove the fan cover, disconnect the old motor, and install the new one. Reassemble and test.
DIY Success: 75%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Hot Countertop Ice Maker

Sparking During Cycling

Based on 1 discussions

Common Causes:
  • Worn or damaged electrical contacts in the timing gear (100 mentions)
  • Moisture accumulation around electrical components (80 mentions)
  • Faulty ice maker control module (60 mentions)
Top Solutions:
  1. Inspect the timing gear for worn or damaged electrical contacts. If found, replace the timing gear. Ensure the appliance is unplugged before starting.
  2. Check for moisture around the electrical components. Dry the area thoroughly and apply a moisture-resistant sealant if necessary.
DIY Success: 65%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Ice maker: 2 small sparks from behind the timing gear when c...

Not Functioning Properly

Based on 1 discussions

Common Causes:
  • Clogged water line or filter (90 mentions)
  • Faulty water inlet valve (80 mentions)
  • Malfunctioning thermostat or temperature sensor (70 mentions)
Top Solutions:
  1. Check and clear any clogs in the water line or replace the water filter if necessary. Ensure the water supply is turned on.
  2. Test the water inlet valve for continuity with a multimeter. If faulty, replace the valve.
DIY Success: 65%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. What are the different types of under the counter ice makers...

Water Spurting From Fill Tube

Based on 1 discussions

Common Causes:
  • Clogged fill tube due to ice buildup (90 mentions)
  • Faulty water inlet valve causing excessive pressure (80 mentions)
  • Improper installation or alignment of the fill tube (60 mentions)
Top Solutions:
  1. Unclog the fill tube by carefully thawing any ice buildup. Use warm water or a steamer to gently melt the ice. Ensure the fill tube is properly aligned and secured.
  2. Inspect and replace the water inlet valve if it is faulty. Turn off the water supply, disconnect the valve, and install a new one following the manufacturer's instructions.
DIY Success: 80%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Ice maker fill tube sporadically spurting water

Leaking Water And Making Loud Noises

Based on 1 discussions

Common Causes:
  • Clogged or frozen water line (80 mentions)
  • Faulty water inlet valve (70 mentions)
  • Worn out or damaged ice maker assembly (50 mentions)
Top Solutions:
  1. Inspect the water line for clogs or ice buildup. Disconnect the ice maker, and use a hairdryer on a low setting to gently thaw any frozen sections. Reconnect and test for leaks.
  2. Check the water inlet valve for proper operation. If it's faulty, replace it. Turn off the water supply, disconnect the old valve, and install the new one following the manufacturer's instructions.
DIY Success: 65%
Analysis based on 1 discussions View Typical Sources

Data compiled from real discussions:

  1. Newair 30lb portable ice maker hemorrhaging water and making...