Hotpoint Washing Machine Error F16
⚡ Quick Answer: The Hotpoint Washing Machine F16 error indicates a malfunction in the drum lock position sensor, causing the drum to stop incorrectly or the door to o... ✅ DIY Fixable
What Does Error F16 Mean?
The Hotpoint Washing Machine F16 error indicates a malfunction in the drum lock position sensor, causing the drum to stop incorrectly or the door to open and close improperly. This issue may stem from a faulty sensor, a mechanical obstruction, or wiring problems between the sensor and control board.
Common Symptoms:
- Drum fails to lock in correct position
- Drum stops incorrectly during cycle
- Lid/door may not open or close properly
Possible Causes
- Faulty drum position sensor (medium)
- Mechanical obstruction or jam preventing proper drum positioning (medium)
- Wiring/connectivity issue between sensor and control board (medium)
How to Fix Error F16
DIY Fix Basic checks for F16
- Turn off and unplug the washing machine.
- Check that no items are jammed between the drum and tub.
- Try gently rotating the drum by hand to see if it moves freely.
- Ensure the lid/door closes fully without obstruction and retry starting a cycle.
Technician Only Inspect/repair position sensor and related components
- Disconnect power and remove relevant panels to access the drum position sensor.
- Inspect the sensor, wiring harness, and connectors for damage or loose connections.
- Test the sensor with appropriate tools (e.g., multimeter) per model specifications.
- Replace the sensor or repair wiring if faulty.
- Verify drum locking mechanism operation; lubricate or repair mechanical parts if needed.
Parts needed: Drum position sensor, Wiring harness/connectors, Possible drum lock mechanism components
- If the error persists after basic checks and reset attempts
- If internal inspection or part replacement is beyond user capability
- If water leakage or electrical component issues are suspected
Next step
Choose the next step for F16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
- Typical part-only price
- $20 - $120
- DIY difficulty
- Medium
- Estimated time
- 30-90 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | C00206663 |
| voltage_rating | 230V AC |
Common Questions
What does F16 error mean on Hotpoint Washing Machine?
F16 indicates a malfunction in the drum lock position sensor, affecting door operation.
Can I fix Hotpoint Washing Machine F16 error myself?
Yes, you can check for jams and gently rotate the drum after unplugging the machine.
How much does it cost to fix F16 error?
Repair costs range from $50 to $200 for parts, plus labor.
When should I call a technician for F16?
Call a technician if the error persists after checks or if internal repairs are needed.
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!