Hotpoint Dishwasher Error F13
⚡ Quick Answer: The Hotpoint dishwasher error F13 indicates a fault in the main control board, often causing the appliance to stop mid-cycle and display specific LED ... ✅ DIY Fixable
What Does Error F13 Mean?
The Hotpoint dishwasher error F13 indicates a fault in the main control board, often causing the appliance to stop mid-cycle and display specific LED patterns. This error may also be accompanied by unusual noises during operation, signaling that the control module is unresponsive or has failed. If the F13 code persists, further diagnosis and repair are necessary.
Common Symptoms:
- Dishwasher stops mid‑cycle and displays F13
- Control panel shows specific LED pattern associated with F13 (e.g., LED combination indicating main board fault)
- Dishwasher fails to proceed with normal wash functions
Possible Causes
- Control board (main PCB) failure (medium)
How to Fix Error F13
DIY Fix Basic power reset and symptom check
- Turn off the dishwasher and unplug it from the mains power.
- Wait 5–10 minutes to allow electronic discharge.
- Plug the dishwasher back in and power it on to see if F13 clears.
Technician Only Control board diagnosis and replacement
- Verify correct error code display and confirm symptoms.
- Inspect wiring harnesses, connectors, and fuses related to the control board for damage or loose connections.
- Test main PCB components with appropriate diagnostic tools.
- Replace the failed control board with OEM part if confirmed defective.
Parts needed: Main control board (PCB), Control panel/display wiring harness
- If the error persists after reset attempts
- If you are not experienced with appliance electronics
- If visible damage to wiring or PCB components is found
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 60W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | WD19X10015 |
| voltage_rating | 120V AC |
Common Questions
What does F13 error mean on Hotpoint dishwasher?
F13 indicates a malfunction in the main control board, causing the dishwasher to stop mid-cycle.
Can I fix Hotpoint dishwasher F13 error myself?
Yes, you can try a power reset by unplugging the dishwasher for 5-10 minutes.
How much does it cost to fix F13 error?
Repair costs are medium to high, especially if the main control board needs replacement.
When should I call a technician for F13?
Call a technician if the error persists after a reset or if you notice visible damage to the wiring or PCB.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!