Hotpoint Dishwasher Error F02
⚡ Quick Answer: The Hotpoint Dishwasher F02 error indicates a malfunction with the water fill system, typically caused by a failing water inlet solenoid valve or a bl... ✅ DIY Fixable
What Does Error F02 Mean?
The Hotpoint Dishwasher F02 error indicates a malfunction with the water fill system, typically caused by a failing water inlet solenoid valve or a blocked water inlet. This issue prevents the dishwasher from filling with water, resulting in a halted cycle and the display of the F02 code. Unusual noises may also occur during operation as the appliance struggles to function properly.
Common Symptoms:
- Dishwasher does not fill with water when a cycle starts
- Error code F02 displayed on digital panel or via LED pattern
- Cycle stops shortly after starting due to lack of water
Possible Causes
- Water fill solenoid valve failure (medium)
- Restricted or blocked water inlet (hose filter or supply issue) (medium)
How to Fix Error F02
DIY Fix Basic water supply and inlet checks
- Turn off power to the dishwasher and water supply.
- Ensure the household water supply tap feeding the dishwasher is fully open.
- Check that the inlet hose is not kinked or trapped behind cabinetry.
- Remove the inlet hose and clean the mesh filter at both ends to clear any debris.
Technician Only Test and replace water inlet solenoid valve
- Disconnect dishwasher from mains power and water supply.
- Access the base of the dishwasher to locate the water inlet solenoid valve.
- Use a multimeter to test the solenoid valve coils for correct resistance values.
- Replace the solenoid valve if it shows open circuit, short, or no operation.
- Reassemble and test the dishwasher for proper filling and cycle operation.
Parts needed: Water inlet solenoid valve, Inlet hose and filter grommets (if needed)
- If F02 persists after basic water supply and inlet checks
- If the solenoid valve tests within spec but error remains, indicating possible control board or sensor issues
- If you are not comfortable working near electrical and water connections
Next step
Choose the next step for F02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Water Supply Hose
Connects your home water valves to the water inlet valve on the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F02 error mean on Hotpoint Dishwasher?
F02 indicates a water fill malfunction, preventing the dishwasher from starting due to lack of water.
Can I fix Hotpoint Dishwasher F02 error myself?
Yes, check the water supply and inlet hose for kinks or blockages before calling a technician.
How much does it cost to fix F02 error?
The repair cost typically ranges from $50 to $150, depending on parts and labor.
When should I call a technician for F02?
Call a technician if the error persists after basic checks or if you're not comfortable with electrical repairs.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!