Hotpoint Dishwasher Error F01

⚡ Quick Answer: The Hotpoint Dishwasher error F01 indicates a water leak detected in the base tray, often due to a control board failure. This error typically stops t... ✅ DIY Fixable

What Does Error F01 Mean?

The Hotpoint Dishwasher error F01 indicates a water leak detected in the base tray, often due to a control board failure. This error typically stops the dishwasher mid-cycle and may cause flashing lights or unresponsive buttons. The anti-flood pump may activate continuously to remove water from the base, signaling a potential issue with internal components like hoses or seals.

Common Symptoms:

  • Dishwasher stops mid‑cycle with F01 displayed
  • Water detected in the base pan or slow drainage
  • Anti‑flood pump may run continuously to empty base tray

Possible Causes

  • Water collected in base tray triggering anti‑flood switch (medium)
  • Leak from internal component (hose, seal, gasket) leading to water in base (medium)

How to Fix Error F01

DIY Fix Check for and remove water from base tray

  1. Disconnect dishwasher from power
  2. Carefully tilt unit backward to allow water in base tray to drain onto a cloth or shallow tray
  3. Dry the base area and inspect for signs of water entry

DIY Fix Inspect for visible leaks and seal issues

  1. Examine door seals, water inlet/outlet hoses, and internal connections for cracks or loose fittings
  2. Tighten or replace visibly damaged seals or hoses

Technician Only Test and repair internal leak sources

  1. Remove dishwasher access panels
  2. Check internal water circuits, seals, and pump housing for leaks
  3. Repair or replace leaking components (hoses, seals, gaskets)

Parts needed: Door seal, Internal hoses, Pump housing gasket

Technician Only Verify anti‑flood switch function

  1. Access the base tray area
  2. Check anti‑flood switch and float assembly for correct operation
  3. Replace anti‑flood switch assembly if faulty

Parts needed: Anti‑flood/float switch

🛑 When to Call a Pro:
  • If water continues to enter base after draining and basic checks
  • If error persists after drying and inspection
  • If internal wiring or electrical components show damage

Technical Specifications

wattage N/A
component Control Board
resistance N/A
part_number WH12X10524
voltage_rating 120V AC

Common Questions

What does F01 error mean on Hotpoint Dishwasher?

F01 indicates a water leak detected in the base tray, potentially due to a control board failure.

Can I fix Hotpoint Dishwasher F01 error myself?

Yes, you can check and remove water from the base tray and inspect for visible leaks.

How much does it cost to fix F01 error?

Estimated repair costs range from $50 to $200+, depending on the parts needed.

When should I call a technician for F01?

Call a technician if water continues to enter the base after draining or if the error persists.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!