Hoover Dishwasher Error E13
⚡ Quick Answer: The E13 error code on Hoover dishwashers indicates a water leakage detection issue, often linked to a faulty flow meter or water distribution system. ... ✅ DIY Fixable
What Does Error E13 Mean?
The E13 error code on Hoover dishwashers indicates a water leakage detection issue, often linked to a faulty flow meter or water distribution system. This may cause water to enter the dishwasher slowly or intermittently, and you might hear unusual sounds from the pump area. To resolve this, check the water supply and inlet hose for kinks or blockages before considering a more in-depth inspection.
Common Symptoms:
- Dishwasher displays E13 code on panel
- Water entering slowly or intermittently
- Unusual fill noises or water distribution issues
Possible Causes
- Faulty or blocked flow meter / water distribution assembly (medium)
How to Fix Error E13
DIY Fix Check water supply and basic inlet issues
- Ensure water supply valve to dishwasher is fully open
- Check inlet hose for kinks or blockages
- Restart dishwasher to see if E13 clears
Technician Only Inspect and service flow meter and water distribution system
- Disconnect power and water to the dishwasher
- Access the side water matrix and locate the flow meter assembly
- Inspect for scale build‑up, debris in water channels, and proper insertion of the flow meter connector
- Clean or flush the water distribution matrix as required
- Replace the flow meter assembly if defective
Parts needed: flow meter / water matrix assembly
- If error persists after checking water supply and basic inlet hose conditions
- If you are not comfortable performing internal inspection or parts replacement
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Leakage Sensor |
| resistance | 1-5 ohms |
| part_number | HWD-SENSOR-001 |
| voltage_rating | 230V AC |
Common Questions
What does E13 error mean on Hoover dishwasher?
E13 indicates a water leakage detection issue, often due to a faulty flow meter, causing slow water entry.
Can I fix Hoover dishwasher E13 error myself?
Yes, check the water supply, ensure the inlet hose is clear, and restart the dishwasher.
How much does it cost to fix E13 error?
Repair costs range from $50 to $200 for parts, excluding labor.
When should I call a technician for E13?
Call a technician if the error persists after checking the water supply or if you're unsure about internal repairs.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!