Hoover Dishwasher Error E08

⚡ Quick Answer: The Hoover dishwasher E08 error indicates a low water level detected by the water level sensor, which can lead to inadequate performance during operat... ✅ DIY Fixable

What Does Error E08 Mean?

The Hoover dishwasher E08 error indicates a low water level detected by the water level sensor, which can lead to inadequate performance during operation. Symptoms include the E08 error displayed while running, visibly low water in the tub, and spray arms that may not effectively reach the dishes due to insufficient water. This issue can stem from a blocked inlet filter, low mains pressure, or faulty water fill components.

Common Symptoms:

  • Dishwasher displays E08 while running
  • Water appears low in tub
  • Spray arms may not reach dishes due to insufficient water

Possible Causes

  • Low water level / insufficient fill detected by water level sensor or related components (medium)
  • Inlet water flow restriction (blocked inlet filters or low mains pressure) (medium)
  • Faulty pressure switch or misread water level (low)

How to Fix Error E08

DIY Fix Verify water supply and basic checks

  1. Ensure household water supply is fully turned on and has adequate pressure
  2. Check dishwasher inlet hose and filters for debris
  3. Restart dishwasher after clearing any access issues

Technician Only Inspect and test water fill components

  1. Disconnect power and water to the dishwasher
  2. Remove access panels to inspect inlet valve, filters, and pressure switch/flow sensor
  3. Test water inlet valve function and water pressure at unit
  4. Replace faulty inlet valve, pressure switch, or clear blockages as needed

Parts needed: inlet valve, pressure switch/flow meter, inlet hose filter

🛑 When to Call a Pro:
  • If error persists after basic water supply and filter checks
  • If suspected pressure switch or control sensor faults remain unresolved

Next step

Choose the next step for E08

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Pressure Switch

Detects the water level inside the tub and signals when to start or stop filling.

Typical part-only price
$25 - $65
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E08 error mean on Hoover dishwasher?

E08 means the dishwasher detects a low water level, affecting its ability to operate properly.

Can I fix Hoover dishwasher E08 error myself?

Yes, you can check the water supply, ensure it's turned on, and clean the inlet filters.

How much does it cost to fix E08 error?

Repair costs typically range from $50 to $200, depending on the issue.

When should I call a technician for E08?

Call a technician if the error persists after checking the water supply and filters, or if you suspect a faulty pressure switch.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!