Hoover Dishwasher Error E07
⚡ Quick Answer: The Hoover dishwasher E07 error indicates a drain pump issue, often triggered by the anti-flood detection system. This occurs when water is detected i... ✅ DIY Fixable
What Does Error E07 Mean?
The Hoover dishwasher E07 error indicates a drain pump issue, often triggered by the anti-flood detection system. This occurs when water is detected in the base of the unit, causing the drain pump to run continuously and the machine to stop mid-cycle. Commonly, this issue arises from leaks in hoses, seals, or the pump housing, leading to standing water in the base tray during operation.
Common Symptoms:
- Dishwasher displays E07 during or after a cycle
- Drain pump runs continuously
- Water may be detected in the base of the dishwasher
- Machine stops mid‑cycle
Possible Causes
- Leak detection / anti‑flood system activation due to water in the base tray (medium)
- Actual physical leak from hoses, sump seal, pump housing, or door seal (medium)
How to Fix Error E07
DIY Fix Check for visible water and leaks
- Immediately stop the dishwasher and turn off both power and water supply.
- Remove the lower front access panel or kick plate to look for standing water in the base tray.
- If water is present, carefully sponge or towel up all water from the base.
- Visually inspect around hoses, the door seal, and sump area for any obvious signs of leakage.
Technician Only Inspect and repair leak sources and reset anti‑flood system
- With power disconnected and water off, remove panels to access the dishwasher’s base.
- Inspect hose connections (inlet, drain, and circulation pump hoses) for cracks or loose clamps and replace or tighten as needed.
- Check the sump seal and replace if degraded.
- Examine the pump housing for cracks and replace the circulation pump assembly if necessary.
- Ensure the door gasket is intact; replace if torn or worn.
- Dry the base thoroughly and test the anti‑flood float switch for proper operation.
- Reassemble and run a test cycle to confirm the E07 code does not reappear.
Parts needed: Hose clamps, Inlet/drain/circulation hoses, Sump seal, Circulation pump assembly, Door gasket
- If water continues to appear in the dishwasher base after cleanup and the E07 code returns, indicating an unresolved or hidden leak.
- If internal inspections reveal damaged components such as cracked pump housing or failed seals that require part replacement.
- If you are not comfortable safely accessing internal components or if multiple components may be leaking.
Next step
Choose the next step for E07
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E07 error mean on Hoover dishwasher?
E07 indicates a drain pump issue caused by water detection in the base, stopping the machine mid-cycle.
Can I fix Hoover dishwasher E07 error myself?
Yes, check for visible leaks and standing water in the base tray, then clean it up. Turn off power and water supply before proceeding.
How much does it cost to fix E07 error?
Repair costs range from ¥10,000 to ¥40,000+, depending on parts and labor needed for repairs.
When should I call a technician for E07?
Call a technician if leaks persist after cleanup, if you find damaged components, or if you're uncomfortable accessing internal parts.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!