Hoover Dishwasher Error E06

⚡ Quick Answer: The Hoover dishwasher error E06 signals a malfunction in the circulation or wash pump, which can lead to failure in draining water effectively. Users ... ✅ DIY Fixable

What Does Error E06 Mean?

The Hoover dishwasher error E06 signals a malfunction in the circulation or wash pump, which can lead to failure in draining water effectively. Users may notice the dishwasher halting mid-cycle, a lack of spray arm rotation, and overall poor washing performance. This error is often accompanied by unusual noises, indicating potential blockages or a fault in the pump assembly that may require inspection and service.

Common Symptoms:

  • Dishwasher displays E06 and stops mid‑cycle
  • Spray arms may not rotate
  • Poor wash performance

Possible Causes

  • Circulation pump or wash pump fault (medium)
  • Blocked pump impeller / foreign object in sump (medium)
  • Loose or damaged pump wiring (medium)
  • Pressure switch fault (alternate interpretation) (low)

How to Fix Error E06

DIY Fix Basic visual checks and restart

  1. Turn off the dishwasher and disconnect from power.
  2. Check for obvious blockages in the spray arms or filter area.
  3. Remove and clean the spray arms and filters.
  4. Restore power and run a short cycle to see if the error recurs.

Technician Only Inspect and service circulation / wash pump

  1. Disconnect power and water supply.
  2. Access the pump assembly by removing the base panel.
  3. Inspect and remove any debris from the impeller and sump.
  4. Check the circulation pump motor for proper rotation and resistance.
  5. Verify wiring connections to the pump for continuity.
  6. Replace the circulation pump assembly if faulty.

Parts needed: Circulation / wash pump assembly, Impeller, Wiring harness/connectors

🛑 When to Call a Pro:
  • If the dishwasher continues to show E06 after basic cleaning and restart
  • If the circulation pump hums but does not turn (possible seized pump)
  • If unfamiliar with electrical/motor diagnostics

Next step

Choose the next step for E06

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Dishwasher Circulation Pump

Circulates pressurized water through the dishwasher spray arms during the wash cycle.

Typical part-only price
$90 - $220
DIY difficulty
Hard
Estimated time
60-120 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does E06 error mean on Hoover dishwasher?

E06 indicates a circulation or wash pump fault, causing the dishwasher to stop mid-cycle and exhibit poor wash performance.

Can I fix Hoover dishwasher E06 error myself?

Yes, you can perform basic checks by cleaning spray arms and filters after disconnecting the power.

How much does it cost to fix E06 error?

Repair costs range from $80 to $300, depending on the parts and labor required.

When should I call a technician for E06?

Call a technician if the error persists after cleaning, the pump hums but doesn't turn, or if you're not comfortable with electrical diagnostics.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!