Hitachi Washing Machine Error C2
⚡ Quick Answer: The Hitachi washing machine error C2 indicates a drainage abnormality, where water fails to drain from the drum. This can occur during or after a wash... ✅ DIY Fixable
What Does Error C2 Mean?
The Hitachi washing machine error C2 indicates a drainage abnormality, where water fails to drain from the drum. This can occur during or after a wash cycle, causing the machine to stop mid-cycle. Symptoms include residual water in the drum, the drum not spinning, and potential water overflow from filter areas. Common causes include a blocked drain hose, clogged drain filter, or malfunctioning internal pump components. Regular maintenance and clearing of the drain path are essential to prevent this issue.
Common Symptoms:
- Error displayed during or after wash cycle when water remains in the drum
- Washing stops mid‑cycle
- Drum does not proceed to spin due to residual water
- Possible water appearing at or overflowing from filter areas
Possible Causes
- Drain hose blockage or improper configuration (high)
- Clogged or dirty drain filter and pump inlet (high)
- Internal pump, valve or sensor malfunction (medium)
How to Fix Error C2
DIY Fix Check and clear drain path
- Turn off and unplug the washing machine before inspection.
- Run a drain/spin cycle to see if residual water is removed.
- Inspect and clean the lint/drain filter of debris.
- Check the drain hose for kinks, bends, or visible blockages.
- Ensure the drain hose is installed correctly (not elevated too high or submerged improperly).
- Check the household drain outlet for clogs.
Technician Only Inspect and service internal drainage components
- Diagnose and test discharge pump operation and impeller movement.
- Check drain valve and water level sensors for correct operation.
- Perform internal hose and pipe clearing if external cleaning did not resolve the issue.
- Replace faulty pump, sensor, or associated drainage components as needed.
Parts needed: Drain pump assembly, Drain hose, Drain filter, Water level/pressure sensor
- If drainage is blocked even after cleaning both the drain filter and hose
- If error code persists or reappears immediately on restart
- If there is unusual noise from the drain pump during attempted drain cycles
- If you observe water leaks or potential electrical issues
Next step
Choose the next step for C2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | HITACHI-DLA-001 |
| voltage_rating | 240V AC |
Common Questions
What does C2 error mean on Hitachi washing machine?
C2 error signifies a drainage abnormality, causing the machine to stop with water remaining in the drum.
Can I fix Hitachi washing machine C2 error myself?
Yes, you can check and clean the drain hose and filter to resolve the C2 error.
How much does it cost to fix C2 error?
Repair costs for the C2 error range from ¥8,000 to ¥30,000, depending on parts and labor.
When should I call a technician for C2?
Call a technician if the error persists after cleaning or if you notice unusual noises or leaks.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!