Hitachi Dishwasher Error E5
⚡ Quick Answer: The Hitachi dishwasher E5 error indicates a malfunction in the pressure switch or water level sensor, often resulting in improper water level detectio... ✅ DIY Fixable
What Does Error E5 Mean?
The Hitachi dishwasher E5 error indicates a malfunction in the pressure switch or water level sensor, often resulting in improper water level detection. This error can cause the dishwasher to halt operation, fail to drain water effectively, and produce unusual noises during cycles. Addressing drainage obstructions and ensuring the water level sensor is functioning correctly are crucial steps in resolving this issue.
Common Symptoms:
- Dishwasher stops operation and displays E5 before or during a cycle
- Water may not drain properly before or after a cycle
- Machine fails to progress through wash due to sensor detection
Possible Causes
- Pressure switch or water-level sensor fault or misreading (medium)
- Drainage obstruction leading to water accumulation, triggering flood/level sensor (medium)
How to Fix Error E5
DIY Fix Check Drainage Path and Clean Filters
- Turn off and disconnect power from the dishwasher.
- Remove and clean the dishwasher’s drain filter and check for debris.
- Inspect and straighten the drain hose to ensure it isn’t kinked or blocked.
- Reconnect and run a short cycle to see if the E5 error clears.
Technician Only Inspect and Test Pressure Switch / Water Level Sensor
- Power off and access the dishwasher base/pump assembly.
- Locate the pressure switch and its small hose/tubing to the sump.
- Check for blockages in the pressure chamber or hose.
- Test the pressure switch electrical continuity and replace if defective.
- Verify wiring between the pressure switch and control board.
Parts needed: pressure switch, pressure hose/tubing
- If the error persists after clearing drainage paths and basic sensor/hose inspection
- If water leakage into the dishwasher base is observed
- If internal sensor components test out of specification or wiring is damaged
Next step
Choose the next step for E5
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E5 error mean on hitachi dishwasher?
E5 error indicates a malfunction in the pressure switch or water level sensor, leading to drainage issues.
Can I fix hitachi dishwasher E5 error myself?
Yes, you can check the drainage path, clean filters, and inspect the drain hose for blockages.
How much does it cost to fix E5 error?
The estimated repair cost for the E5 error ranges from ¥5,000 to ¥15,000 for sensor parts plus labor.
When should I call a technician for E5?
Call a technician if the error persists after your checks, if you see water leakage, or if internal components are faulty.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!