Hisense Refrigerator Error ER

⚡ Quick Answer: The Hisense Refrigerator error code ER indicates a communication fault between control boards, often leading to improper cooling and unusual noises. T... ✅ DIY Fixable

What Does Error ER Mean?

The Hisense Refrigerator error code ER indicates a communication fault between control boards, often leading to improper cooling and unusual noises. This error may arise after a power interruption and is characterized by the display showing 'ER' instead of the temperature. A malfunction in the evaporator fan could also contribute to these issues.

Common Symptoms:

  • Display shows "ER" instead of temperature
  • Refrigerator/freezer not cooling properly
  • Lights or display issues accompanying the error
  • Triggered after power interruption

Possible Causes

  • Communication fault between control boards (medium)
  • Possible freezer temperature sensor or wiring fault (low)

How to Fix Error ER

DIY Fix Power reset and basic checks

  1. Unplug refrigerator from power outlet for at least 5 minutes.
  2. If not easily unplugged, turn off the dedicated circuit breaker for the fridge for 5 minutes.
  3. Plug the fridge back in or restore breaker and observe if the ER message clears.
  4. Ensure no immediate visible damage to wiring around the display panel.

Technician Only Inspect control boards and communication wiring

  1. Disconnect power and access rear control board area.
  2. Inspect wiring harnesses between main control board and display/control panel for loose, damaged, or corroded connectors.
  3. Test communication signals between boards with a multimeter as per service manual.
  4. Replace defective control board(s) if communication cannot be reestablished.

Parts needed: Main control board, Display/control panel board, Wiring harness

🛑 When to Call a Pro:
  • If ER code persists after reset and basic user checks
  • If unusual noises or temperatures continue indicating cooling failure
  • If internal wiring damage is suspected or boards need replacement

Next step

Choose the next step for ER

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

User Interface Board

Receives button or touch input and controls the appliance display and indicators.

$70 - $220 · Medium · 20-60 mins

Check fit & price
Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage 15W
component Evaporator Fan Motor
resistance 50-100 ohms
part_number Hisense 3105A
voltage_rating 120V AC

Common Questions

What does ER error mean on Hisense Refrigerator?

The ER error indicates a communication fault between control boards, resulting in cooling issues.

Can I fix Hisense Refrigerator ER error myself?

Yes, you can try a power reset by unplugging the fridge for 5 minutes.

How much does it cost to fix ER error?

Repair costs range from ¥15,000 to ¥55,000, depending on parts and labor.

When should I call a technician for ER?

Call a technician if the ER code persists after a reset or if unusual noises and temperatures continue.

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!