Haier Washing Machine Error FF

⚡ Quick Answer: The FF error code on your Haier washing machine typically indicates a malfunction in the water level sensor. This issue can prevent the machine from f... ✅ DIY Fixable

What Does Error FF Mean?

The FF error code on your Haier washing machine typically indicates a malfunction in the water level sensor. This issue can prevent the machine from filling or draining water properly, disrupting your laundry cycles. To resolve this, you can start by performing a basic power reset. If the error persists and you cannot find specific documentation for your model, it may be necessary to contact Haier service for further assistance.

Possible Causes

  • Water Level Sensor
  • Wiring Issues
  • Control Board Failure

How to Fix Error FF

DIY Fix Verify clear official documentation or manual for your specific model

  1. Locate the exact model number on your Haier washing machine.
  2. Search for the user manual or error code table for that model on official Haier support sites or in the printed manual.
  3. Check specifically for "FF" in that documentation.

DIY Fix Basic power reset

  1. Switch off the washing machine and disconnect the power plug.
  2. Wait 5–10 minutes to allow internal electronics to discharge.
  3. Reconnect the power and attempt a normal cycle.

Technician Only Contact Haier service with exact model and code description

  1. Record when and how the FF code appears (start, during cycle, after spin, etc.).
  2. Contact Haier authorized service with machine model, serial number, and FF code display.
  3. Technician should reference official service documentation or diagnostic tools for your model.
🛑 When to Call a Pro:
  • If the FF code persists after power cycling and you cannot find documentation, contact Haier support.

Next step

Choose the next step for FF

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Pressure Switch

Detects the water level inside the tub and signals when to start or stop filling.

Typical part-only price
$25 - $65
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Water Level Sensor
resistance 5-10 ohms
part_number Haier 002200000000
voltage_rating 120V AC

Common Questions

What does FF error mean on haier washing machine?

The FF error indicates a malfunction in the water level sensor, affecting filling and draining.

Can I fix haier washing machine FF error myself?

Yes, you can try a power reset by disconnecting and reconnecting the machine after 5-10 minutes.

How much does it cost to fix FF error?

Repair costs vary by model and region; contacting Haier service can provide a specific estimate.

When should I call a technician for FF?

Call a technician if the FF code remains after a power reset and you cannot find the model documentation.

Sources & References

Data last verified: 2026-07-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!