Haier Washing Machine Error FC
⚡ Quick Answer: The Haier washing machine FC error code indicates a malfunction in the door lock mechanism or an internal communication fault. This error often result... ✅ DIY Fixable
What Does Error FC Mean?
The Haier washing machine FC error code indicates a malfunction in the door lock mechanism or an internal communication fault. This error often results in the washing machine stopping mid-cycle, displaying the FC code, and not responding to user inputs. The issue may stem from a problem with the control/display board, main PCB, or internal sensors. Proper troubleshooting is essential to resolve the fault and restore normal operation.
Common Symptoms:
- Washing machine stops mid-cycle
- Display shows FC (possibly with variations like FC0/FC1/FC2)
- Machine may not respond to inputs
Possible Causes
- Internal communication fault between control/display board and main PCB (medium)
- Internal sensor abnormality detected (medium)
How to Fix Error FC
DIY Fix Basic reset and checks
- Turn off the washing machine and unplug it from the power outlet.
- Wait at least 1–2 minutes, then plug it back in and restart.
- Ensure the door/lid is fully closed and latched (if applicable).
Technician Only Inspect communication and sensor circuitry
- Check physical connections between the control/display board and the main PCB for loose connectors or corrosion.
- Test the internal sensors and communication buses with appropriate diagnostic tools.
- Replace faulty PCB or sensor modules if confirmed by testing.
Parts needed: Control/display board, Main PCB, Internal sensor modules, Communication harness/connectors
- If the error recurs after basic reset
- If internal boards or sensors test faulty
- If unfamiliar with electrical diagnostics
Next step
Choose the next step for FC
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
User Interface Board
Receives button or touch input and controls the appliance display and indicators.
- Typical part-only price
- $70 - $220
- DIY difficulty
- Medium
- Estimated time
- 20-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 1-5 ohms |
| part_number | Haier 002020021 |
| voltage_rating | 120V AC |
Common Questions
What does FC error mean on haier washing machine?
The FC error indicates a door lock malfunction or an internal communication fault, causing the machine to stop mid-cycle.
Can I fix haier washing machine FC error myself?
Yes, you can attempt a basic reset by unplugging the machine for 1-2 minutes and ensuring the door is fully closed.
How much does it cost to fix FC error?
The estimated repair cost ranges from ¥10,000 to ¥40,000+, depending on parts and labor.
When should I call a technician for FC?
You should call a technician if the error recurs after a reset, or if you're unfamiliar with electrical diagnostics.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!