Haier Washing Machine Error F6

⚡ Quick Answer: The Haier washing machine F6 error code indicates a drainage issue, often resulting in the washing cycle stopping midway. This error typically occurs ... ✅ DIY Fixable

What Does Error F6 Mean?

The Haier washing machine F6 error code indicates a drainage issue, often resulting in the washing cycle stopping midway. This error typically occurs when water fails to drain within the expected time, leaving water in the drum. Common causes include a clogged drain path or problems with the drain pump, which may be unable to clear water due to installation issues.

Common Symptoms:

  • Washing cycle stops part‑way with code F6
  • Water remains in drum after attempted drain
  • Drain pump runs but water level doesn’t reduce

Possible Causes

  • Clogged or blocked drain path (filter/hose) (medium)
  • Drain pump difficulty clearing water due to hose installation issues (medium)

How to Fix Error F6

DIY Fix Check and clear drain filter and hose

  1. Power off and unplug the washer
  2. Locate and open the drain filter access panel (usually at bottom front)
  3. Place a shallow tray/towels underneath
  4. Unscrew filter and remove debris
  5. Check drain hose for kinks or clogs and straighten or clear as needed
  6. Reassemble filter, plug in and test a rinse/drain cycle

Technician Only Inspect and service drain pump and plumbing

  1. Disconnect washer from power and water
  2. Remove and inspect drain pump for debris or impeller damage
  3. Check hose connections and standpipe height/installation per manufacturer specs
  4. Test pump operation with multimeter and replace if failing
  5. Reassemble and test multiple cycles

Parts needed: Drain pump, Drain hose, Seals/gaskets

🛑 When to Call a Pro:
  • If water still doesn’t drain after filter/hose cleaning
  • Unusual noises from pump area
  • Leaks around pump/hose connections

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number Haier 0020001234
voltage_rating 120V AC

Common Questions

What does F6 error mean on haier washing machine?

F6 error indicates a drainage issue, often causing the cycle to stop and water to remain in the drum.

Can I fix haier washing machine F6 error myself?

Yes, you can check and clear the drain filter and hose by following the DIY steps provided.

How much does it cost to fix F6 error?

The estimated repair cost for F6 error ranges from $80 to $250, depending on parts and labor.

When should I call a technician for F6?

Call a technician if the water doesn't drain after cleaning, if you hear unusual noises, or if there are leaks.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!