Haier Washing Machine Error ERR1
⚡ Quick Answer: The Haier washing machine error code ERR1 indicates a malfunction in the door lock mechanism, preventing the machine from starting the wash cycle. Thi... ✅ DIY Fixable
What Does Error ERR1 Mean?
The Haier washing machine error code ERR1 indicates a malfunction in the door lock mechanism, preventing the machine from starting the wash cycle. This often occurs when the door is not fully closed or the latch is not engaged properly. In some cases, a foreign object may obstruct the door closure, leading to this error. Ensuring the door is securely latched before starting the cycle is crucial to avoid this issue.
Common Symptoms:
- Machine will not start wash cycle
- Display shows ERR1 immediately or shortly after selecting cycle
Possible Causes
- Door/lid not fully closed or latch not engaged (medium)
- Foreign object preventing door latch closure (low)
How to Fix Error ERR1
DIY Fix Check and secure the door/lid
- Ensure the door/lid is fully closed and latched before starting cycle
- Inspect the door gasket and opening for any clothing or debris blocking closure
- Try opening and firmly closing the door again
Technician Only Inspect and service door latch mechanism
- Disconnect power and inspect the door latch and striker for wear or damage
- Test door lock switch continuity with a multimeter
- Replace faulty door lock assembly or striker as needed
Parts needed: door lock assembly, door striker/latch
- If the door appears to close properly but the error persists after multiple attempts
- If the door lock mechanism is visibly damaged or not engaging
Next step
Choose the next step for ERR1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 10-20 ohms |
| part_number | Haier 3021000300 |
| voltage_rating | 120V AC |
Common Questions
What does ERR1 error mean on Haier washing machine?
ERR1 indicates a door lock malfunction, preventing the machine from starting.
Can I fix Haier washing machine ERR1 error myself?
Yes, check if the door is fully closed and free from obstructions.
How much does it cost to fix ERR1 error?
$30–$120 for parts, depending on the model.
When should I call a technician for ERR1?
Contact a technician if the door appears fine but ERR1 persists after multiple attempts.
Sources & References
- Haier Combination Washer/Dryer Error Codes (official)
- How to reset error on Haier washing machine (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!