Haier Washing Machine Error E13

⚡ Quick Answer: The Haier washing machine E13 error indicates a drainage issue, often triggered by detected water leakage or anti-flood protection. Users may notice u... ✅ DIY Fixable

What Does Error E13 Mean?

The Haier washing machine E13 error indicates a drainage issue, often triggered by detected water leakage or anti-flood protection. Users may notice unusual sounds, the washer stopping mid-cycle, or the laundry load failing to progress past the door-close stage. Common causes include excessive lint buildup, particularly in combo washer/dryer models, or a malfunctioning door latch. Address these issues promptly to prevent further damage.

Common Symptoms:

  • Washer stops mid‑cycle and displays E13
  • Visible water leakage around machine (in some reports)
  • Laundry load not progressing past door‑close stage

Possible Causes

  • Water leak detected / anti‑flood protection triggered (medium)
  • Excessive lint buildup (Combo washer/dryer models) (medium)
  • Door not properly closed or door lock issue (low)

How to Fix Error E13

DIY Fix Basic checks for E13

  1. Stop the cycle and unplug the washer.
  2. Check around and under the washer for any signs of water leakage.
  3. Ensure the door is fully closed and latched.
  4. Inspect for excessive lint around the drum and door seal, and clean as needed.

Technician Only Professional inspection and repair

  1. Check and test the anti‑flood float switch and base tray for water ingress.
  2. Inspect and tighten/replace hoses, clamps, door gasket, and seals.
  3. Clean or replace lint collection areas (especially on combo washer/dryers).
  4. Test door lock assembly and associated wiring if door‑related issues are suspected.

Parts needed: door latch/lock assembly, hoses and clamps, door gasket, anti‑flood float switch or tray components

🛑 When to Call a Pro:
  • Repeated E13 after basic door and lint checks
  • Visible water pooling under the machine
  • Unclear intermittent causes

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Haier 002500000000
voltage_rating 120V AC

Common Questions

What does E13 error mean on Haier washing machine?

E13 indicates a drainage issue, often due to water leakage or excessive lint buildup.

Can I fix Haier washing machine E13 error myself?

Yes, check for water leakage and ensure the door is fully closed and latched.

How much does it cost to fix E13 error?

Repair costs range from ¥3,000 to ¥12,000, depending on parts and region.

When should I call a technician for E13?

Call if E13 persists after basic checks, or if there's visible water pooling.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!