Haier Washing Machine Error E10
⚡ Quick Answer: The Haier washing machine E10 error indicates a water inlet issue, often showing a fill error or no water entering the drum. This error typically aris... ✅ DIY Fixable
What Does Error E10 Mean?
The Haier washing machine E10 error indicates a water inlet issue, often showing a fill error or no water entering the drum. This error typically arises early in the wash cycle, causing the machine to stop. It may be due to a malfunctioning water level sensor or blocked water intake, preventing the drum from filling to the expected level.
Common Symptoms:
- Error appears early in cycle when attempting to fill with water
- Machine stops and does not proceed to wash cycle
- E10 displayed on panel
Possible Causes
- Water level sensor signal abnormal or water level not reached (medium)
- Insufficient or blocked water intake (medium)
How to Fix Error E10
DIY Fix Check water supply and basic components
- Ensure water faucets supplying the washer are fully open and household water pressure is adequate.
- Inspect the inlet hose for kinks, blockages, or sediment; straighten or clean as needed.
- Power off the machine and clean inlet filter screens if accessible at water hose connection.
- Restart the machine to see if E10 clears.
Technician Only Inspect water level sensor and internal components
- Disconnect power and access internal water level sensor and associated air tube.
- Check the air tube for blockages, leaks, kinks, or detachment and clear or replace as necessary.
- Test the water level sensor (pressure switch) for proper function with multimeter or diagnostic tools.
- If sensor and air tube are functional but issue persists, inspect control board connections and wiring related to water level circuitry.
Parts needed: water level sensor (pressure switch), air tube, control board wiring harness
- If basic user checks do not resolve E10 error after verifying water supply, contact Haier service.
- If internal inspection uncovers damaged components or unclear fault origin.
Next step
Choose the next step for E10
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Water Inlet Valve |
| resistance | 10-30 ohms |
| part_number | Haier 002010000001 |
| voltage_rating | 120V AC |
Common Questions
What does E10 error mean on haier washing machine?
E10 indicates a water inlet issue, preventing the machine from filling with water.
Can I fix haier washing machine E10 error myself?
Yes, check water supply, inspect hoses for blockages, and clean inlet filters.
How much does it cost to fix E10 error?
Repair costs range from $50 to $200 for parts, excluding labor.
When should I call a technician for E10?
Contact a technician if basic checks don't resolve the issue or if internal damage is suspected.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!