Haier Dryer Error F4

⚡ Quick Answer: The Haier dryer F4 error code indicates a malfunction related to the temperature sensor, leading to improper heating and inconsistent drum temperature... ✅ DIY Fixable

What Does Error F4 Mean?

The Haier dryer F4 error code indicates a malfunction related to the temperature sensor, leading to improper heating and inconsistent drum temperatures. Symptoms include failure to heat, early cessation of drying cycles, and the F4 error displayed on the control panel. This issue can stem from a faulty temperature sensor, heating circuit component failure, or a humidity sensor reporting inaccurate data.

Common Symptoms:

  • Dryer fails to heat
  • Drying cycle stops early or is ineffective
  • Error F4 displayed on control panel indicating a heating‑related fault

Possible Causes

  • Temperature sensor (heater or condenser) fault (medium)
  • Heating circuit component failure (heater element / thermostat / heater relay / control triac) (medium)
  • Humidity sensor reporting inconsistent data (possible false trigger) (low)

How to Fix Error F4

DIY Fix Basic checks and reset

  1. Turn off and unplug the dryer for at least 5 minutes to reset memory.
  2. Ensure lint filter, condenser and airflow paths are clean and not obstructed.
  3. Verify the dryer isn’t overloaded and the door is fully closed before restarting.

Technician Only Diagnose and repair heating circuit and sensors

  1. Visually inspect and test temperature sensors (heater thermistor / condenser sensor) for correct resistance and operation with a multimeter.
  2. Check heater element, thermostats, and associated relays / control triac for continuity or signs of damage.
  3. Replace any failed heating circuit components and verify control board functionality.
  4. After repairs, test the dryer through multiple cycles to ensure F4 no longer appears.

Parts needed: Temperature sensors (heater / condenser), Heating element, Thermostats / heater relay / triac, Control board (if component failures are on board)

🛑 When to Call a Pro:
  • If the F4 error persists after cleaning filters and resetting power
  • If you are not comfortable performing electrical diagnostics
  • If parts show signs of burn damage or sensors fail basic continuity tests

Technical Specifications

wattage 3000W
component Temperature Sensor
resistance 10-30 ohms
part_number HAIER-TS12345
voltage_rating 240V AC

Common Questions

What does F4 error mean on haier dryer?

The F4 error signifies a temperature sensor malfunction, causing heating issues and inconsistent drum temperatures.

Can I fix haier dryer F4 error myself?

Yes, you can try basic checks like cleaning filters, resetting the dryer, and ensuring it's not overloaded.

How much does it cost to fix F4 error?

Repair costs typically range from $100 to $300+, depending on parts and labor in your region.

When should I call a technician for F4?

Call a technician if the error persists after cleaning, if you're uncomfortable with electrical diagnostics, or if parts show burn damage.

Sources & References

Data last verified: 2026-03-09

User Comments (0)

Share your experience or solution below.

Be the first to comment!