Haier Dryer Error F33

⚡ Quick Answer: The Haier Dryer error code F33 indicates a malfunction in the thermistor or NTC temperature sensor, leading to improper heating and erratic temperatur... ✅ DIY Fixable

What Does Error F33 Mean?

The Haier Dryer error code F33 indicates a malfunction in the thermistor or NTC temperature sensor, leading to improper heating and erratic temperature readings. This issue often results in the dryer stopping unexpectedly or failing to complete the drying cycle. Addressing this error promptly is crucial for restoring the dryer’s functionality.

Common Symptoms:

  • Machine displays F33 error on control panel
  • Drying cycle may stop or not proceed due to sensor fault

Possible Causes

  • NTC (temperature sensor) failure (medium)

How to Fix Error F33

DIY Fix Basic checks and restart

  1. Turn off the dryer and unplug it from the power outlet.
  2. Wait for a few minutes and plug the dryer back in.
  3. Restart a drying cycle to see if the error resets.

Technician Only Inspect and replace temperature sensor (NTC)/thermistor

  1. Power off and disconnect the dryer from electrical supply.
  2. Access the internal temperature sensor (NTC/thermistor) according to service manual instructions.
  3. Use a multimeter to measure resistance of sensor to ensure it is within specification.
  4. Replace the temperature sensor/NTC if it shows open, short, or out-of-spec values.
  5. Reassemble and test dryer operation.

Parts needed: Temperature sensor (NTC/thermistor)

🛑 When to Call a Pro:
  • If the F33 error persists after power cycling and basic restart attempts.
  • If a technician identifies inconsistent sensor readings or wiring issues.
  • If the dryer displays additional error codes or unusual behavior (e.g., abnormal temperatures).

Next step

Choose the next step for F33

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Temperature Sensor

Monitors the internal temperature to ensure correct operation and prevent overheating.

Typical part-only price
$15 - $35
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage N/A
component Thermistor
resistance 10-15 kΩ
part_number 302202000000
voltage_rating 120V AC

Common Questions

What does F33 error mean on Haier Dryer?

F33 error indicates a thermistor or temperature sensor malfunction, causing heating issues.

Can I fix Haier Dryer F33 error myself?

Yes, try power cycling the dryer by unplugging it for 5-10 minutes to reset the error.

How much does it cost to fix F33 error?

Repair costs for the sensor can range from ¥5,000 to ¥20,000, depending on the model.

When should I call a technician for F33?

Call a technician if the error persists after a reset or if you notice inconsistent sensor readings.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!