Grundig Dishwasher Error PF

⚡ Quick Answer: The Grundig Dishwasher PF error code signifies a power failure, indicating an interruption in the power supply during operation. This error often resu... ✅ DIY Fixable

What Does Error PF Mean?

The Grundig Dishwasher PF error code signifies a power failure, indicating an interruption in the power supply during operation. This error often results in the control panel displaying PF, and the dishwasher may stop its cycle or fail to start altogether. To resolve this issue, a reset is typically required to restore normal operation. It's essential to check your home power supply and ensure that the dishwasher is properly connected to avoid recurring problems.

Common Symptoms:

  • PF displayed on the dishwasher control panel
  • Dishwasher cycle stops or will not start
  • Dishwasher needs reset to begin normal operation

Possible Causes

  • Power interruption or loss detected by dishwasher (medium)

How to Fix Error PF

DIY Fix Reset Dishwasher After Power Failure

  1. Ensure the dishwasher is powered.
  2. Select the desired wash cycle and options.
  3. Press the Start button to clear the PF code and begin operation.

DIY Fix Check Home Power Supply

  1. Verify that there was no recent power outage in your home.
  2. Check the circuit breaker for the dishwasher; reset if tripped.
  3. Ensure the dishwasher’s power cord is securely connected.

Technician Only Inspect Electrical Supply and Internal Connections

  1. Measure incoming voltage to ensure stable supply.
  2. Inspect dishwasher power wiring and internal harnesses for damage or loose connections.
  3. Check the control board for signs of damage caused by power fluctuations.

Parts needed: Multimeter (for voltage check), Control board (if damaged), Internal wiring harness

🛑 When to Call a Pro:
  • If the PF code continually reappears after resets
  • If unstable power supply or internal electrical faults are suspected

Next step

Choose the next step for PF

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Main Control Board

The central brain of the appliance that controls all components, cycles, and timings.

Typical part-only price
$120 - $280
DIY difficulty
Medium
Estimated time
20-40 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Dishwasher parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Dishwasher Cleaner and Descaler

Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.

View maintenance supply
Maintenance supply

Braided Dishwasher Inlet Hose

For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

note The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering.
part_number None

Common Questions

What does PF error mean on Grundig Dishwasher?

PF indicates a power failure, causing the dishwasher to stop or not respond.

Can I fix Grundig Dishwasher PF error myself?

Yes, you can reset the dishwasher and check the power supply.

How much does it cost to fix PF error?

$75 to $300, depending on the repair needs.

When should I call a technician for PF?

If the PF code keeps reappearing or if you suspect electrical faults.

Data last verified: 2026-07-31

User Comments (0)

Share your experience or solution below.

Be the first to comment!