Ge Washing Machine Error E71

⚡ Quick Answer: The GE washing machine E71 error indicates a malfunction in the motor drive unit or control panel, disrupting normal operation. This error often prese... ✅ DIY Fixable

What Does Error E71 Mean?

The GE washing machine E71 error indicates a malfunction in the motor drive unit or control panel, disrupting normal operation. This error often presents with unusual sounds, the washer failing to spin, and potentially inconsistent water levels. If the E71 code appears, it suggests a communication issue between the control board and other components, or a pressure sensor signal out of range.

Common Symptoms:

  • Washer stops and displays E71
  • Possible inconsistent water level (overfill/underfill) in some community reports
  • Washer may not proceed through cycles normally

Possible Causes

  • Control panel/control board communication or internal failure (high)
  • Pressure sensor signal out of range (water level sensing issue) (medium)

How to Fix Error E71

DIY Fix Power reset and basic checks

  1. Unplug the washer from power and wait ~3 minutes to reset control board.
  2. Plug washer back in and observe if E71 reappears.
  3. Ensure washer door/lid is fully closed and controls are dry and clean.

Technician Only Inspect/repair control panel or pressure sensor system

  1. Test communication between control panel and main control board.
  2. If applicable, inspect water level pressure sensor hose and wiring harness for blockages or damage.
  3. Replace faulty control panel or pressure sensor assembly as determined by diagnosis.

Parts needed: Control panel assembly, Water level pressure sensor, Wiring harness/connectors

🛑 When to Call a Pro:
  • If E71 persists after power reset and basic cleaning
  • If water level is inconsistent and internal diagnostics suggest sensor or board faults

Technical Specifications

wattage 500W
component Motor Drive Unit
resistance 10-30 ohms
part_number WH20X10005
voltage_rating 120V AC

Common Questions

What does E71 error mean on GE washing machine?

E71 error indicates a malfunction in the motor drive unit or control panel, leading to operational disruptions.

Can I fix GE washing machine E71 error myself?

Yes, you can try a power reset by unplugging the washer for about 3 minutes and checking for clean, dry controls.

How much does it cost to fix E71 error?

The estimated repair cost for the E71 error ranges from $150 to $400+, depending on parts and labor.

When should I call a technician for E71?

Call a technician if the E71 error persists after a reset or if you notice inconsistent water levels.

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!