GE Washing Machine Error E67
⚡ Quick Answer: The GE washing machine E67 error code indicates a malfunction related to the water temperature sensor (thermistor), which disrupts normal operation. T... ✅ DIY Fixable
What Does Error E67 Mean?
The GE washing machine E67 error code indicates a malfunction related to the water temperature sensor (thermistor), which disrupts normal operation. This error often appears on the control panel during or before the wash cycle and may be accompanied by unusual noises. Potential causes include a defective sensor, loose wiring, or issues with the main control board affecting the sensor's signal.
Common Symptoms:
- E67 displayed on control panel during or before wash cycle.
Possible Causes
- Defective water temperature sensor (thermistor) (high)
- Loose or faulty wiring to the water temperature sensor (medium)
- Faulty main control board affecting temperature sensor signal (medium)
How to Fix Error E67
DIY Fix Check and reseat wiring connectors
- Unplug the washer from power.
- Access the sensor wiring (refer to model diagram).
- Inspect and reseat the connectors on the temperature sensor and control board.
Technician Only Replace water temperature sensor
- Verify continuity and signal from the existing temperature sensor.
- Remove and replace the defective sensor.
- Test the washer to ensure E67 no longer appears.
Parts needed: Water temperature sensor (thermistor), Associated wiring connectors if damaged
Technician Only Inspect and test main control board
- Check sensor circuit on control board with meter.
- Replace control board if sensor circuit faults are detected.
Parts needed: Main control board
- If the error persists after sensor wiring checks and resets.
- If internal diagnostics or multimeter tests indicate sensor or board failure.
Next step
Choose the next step for E67
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 50W |
|---|---|
| component | Drain Pump |
| resistance | 10-30 ohms |
| part_number | WH23X28497 |
| voltage_rating | 120V AC |
Common Questions
What does E67 error mean on GE washing machine?
E67 indicates a malfunction in the water temperature sensor, disrupting wash cycles.
Can I fix GE washing machine E67 error myself?
Yes, check and reseat the wiring connectors to the temperature sensor.
How much does it cost to fix E67 error?
Repair costs for E67 range from $30 to $100 for parts, depending on the model.
When should I call a technician for E67?
Call a technician if the error persists after checking wiring or if diagnostics indicate a sensor or board failure.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!