Ge Washing Machine Error E22

⚡ Quick Answer: The GE washing machine E22 error indicates a water fill timeout, meaning the washer did not fill with sufficient water within the expected time. Sympt... ✅ DIY Fixable

What Does Error E22 Mean?

The GE washing machine E22 error indicates a water fill timeout, meaning the washer did not fill with sufficient water within the expected time. Symptoms include the machine pausing with the E22 code displayed, and it may produce unusual noises during the spin cycle. Common causes involve insufficient water supply due to closed valves, low household pressure, or kinked hoses. Addressing these issues is essential to restore functionality.

Common Symptoms:

  • Washer attempts to fill but takes too long (typically >8 minutes)
  • Cycle pauses and display shows E22
  • Washer doesn’t proceed to wash/rinse/spin due to insufficient water fill

Possible Causes

  • Insufficient water supply (valves closed, low household pressure, kinked hoses) (high)

How to Fix Error E22

DIY Fix Check water supply and inlet hoses

  1. Ensure both hot and cold water supply valves are fully open.
  2. Pull washer from wall and inspect inlet hoses for kinks, sharp bends, or damage.
  3. Straighten hoses and replace if damaged.

DIY Fix Clean inlet hose screens

  1. Turn off the water supply.
  2. Disconnect hot and cold inlet hoses from washer.
  3. Remove and rinse mesh screens inside hose connections to washer.
  4. Reconnect hoses securely and restore water.
  5. Run a test fill cycle.

Technician Only Test and replace water inlet valve

  1. Unplug the washer and shut off water supply.
  2. Remove access panel to reach the water inlet valve assembly.
  3. Use a multimeter to test solenoids for continuity; replace valve assembly if defective.
  4. Reassemble and test washer fill function.

Parts needed: water inlet valve assembly

Technician Only Inspect and service pressure sensor and tubing

  1. Disconnect power and water.
  2. Access pressure sensor and check tube for pinches, obstructions, or disconnection.
  3. Test sensor operation and replace if faulty.
  4. Reassemble and test.
  5. Verify fill detection functions correctly.

Parts needed: pressure sensor, pressure tube

🛑 When to Call a Pro:
  • Error persists after basic water supply and inlet cleaning checks
  • Suspected electrical or valve component failure
  • Repeated E22 on multiple cycles despite troubleshooting

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number WH23X28481
voltage_rating 120V AC

Common Questions

What does E22 error mean on GE washing machine?

E22 error indicates a water fill timeout where the washer fails to fill with sufficient water.

Can I fix GE washing machine E22 error myself?

Yes, check water supply, ensure valves are open, inspect hoses for kinks, and clean inlet hose screens.

How much does it cost to fix E22 error?

Repair costs range from $50 to $200 for parts and labor.

When should I call a technician for E22?

Call if the error persists after troubleshooting or if you suspect an electrical or valve component failure.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!