Ge Washing Machine Error 4

⚡ Quick Answer: The GE washing machine error code 4 signifies a potential malfunction in the door lock mechanism, preventing the door from unlocking or the machine fr... ✅ DIY Fixable

What Does Error 4 Mean?

The GE washing machine error code 4 signifies a potential malfunction in the door lock mechanism, preventing the door from unlocking or the machine from starting. This error can also indicate a Control Reset Error or an Overfill condition, especially in some GE Profile models, leading to symptoms like the washer stopping mid-cycle and water remaining in the tub.

Common Symptoms:

  • Washer stops mid‑cycle
  • Water remains in the tub (reported in some GE Profile models)
  • Error code “4” displayed on control panel

Possible Causes

  • Control board/diagnostic reset condition (medium)
  • Overfill/Overflow condition (specific to some GE Profile models) (medium)

How to Fix Error 4

DIY Fix Power cycle and check water state

  1. Turn off and unplug the washer.
  2. Wait 1–2 minutes, then plug in and restart a cycle.
  3. Observe if the error returns or if water remains in the tub.

Technician Only Inspect control board and water control components

  1. Check for loose connections to the main PCB and sensors.
  2. Test the control board for intermittent resets.
  3. On models where overflow is suspected, verify the water inlet valve and water level sensor/pressure hose are functioning correctly.

Parts needed: Control board (PCB), Water inlet valve, Water level/pressure sensor and hose

🛑 When to Call a Pro:
  • If the error persists after power cycling and basic checks
  • If there is standing water that cannot be drained
  • If internal components (e.g., PCB, sensors) tests indicate failure

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number WH10X10006
voltage_rating 120V AC

Common Questions

What does 4 error mean on GE washing machine?

Error 4 indicates a door lock malfunction or a Control Reset/Error detected, possibly an Overfill condition.

Can I fix GE washing machine 4 error myself?

Yes, you can try power cycling the machine and checking for standing water.

How much does it cost to fix 4 error?

$100–$350+, depending on parts and labor costs in your region.

When should I call a technician for 4?

Call a technician if the error persists after basic checks or if there's standing water that won't drain.

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!