Gaggenau Washing Machine Error E16

⚡ Quick Answer: The Gaggenau washing machine error E16 signifies a door lock monitoring issue, indicating that the appliance is not detecting whether the door is secu... ✅ DIY Fixable

What Does Error E16 Mean?

The Gaggenau washing machine error E16 signifies a door lock monitoring issue, indicating that the appliance is not detecting whether the door is securely locked. This may occur at the start or during a wash cycle, causing the machine to pause or fail to start altogether. Common symptoms include the door appearing open or not locking properly, accompanied by unusual sounds. Troubleshooting may involve checking the door alignment and locking mechanism.

Common Symptoms:

  • Error code E16 displays at start or during cycle
  • Door may not lock or may appear open during cycle
  • Wash cycle will not start or pauses immediately

Possible Causes

  • Faulty or intermittent door lock mechanism or contacts (medium)
  • Loose or misaligned door/latch or wiring to door lock (medium)
  • Control module door lock circuit fault (low)

How to Fix Error E16

DIY Fix Check and reseat the door and door lock

  1. Power off and unplug the washing machine.
  2. Ensure the door is properly aligned and closes squarely against the seal.
  3. Open the door and check for laundry or obstructions in the door seal.
  4. Close the door firmly and start a short cycle to see if E16 clears.

Technician Only Inspect/replace door lock assembly and related wiring

  1. Unplug and access the door lock assembly behind the front panel.
  2. Inspect wiring connectors for damage or looseness; reseat securely.
  3. Test door lock contacts or replace the door lock assembly if worn or intermittent.
  4. After replacement, test the machine operation to confirm E16 resolution.

Parts needed: Door lock assembly, Door strike/latch

Technician Only Diagnose control module door lock circuit

  1. If the door lock and wiring are verified good yet the error persists, test the control module door lock drive circuit for faults.
  2. Inspect for burnt or damaged components on the control board.
  3. Replace or repair control module if confirmed faulty.

Parts needed: Control module (PCB)

🛑 When to Call a Pro:
  • If you are not comfortable opening panels or working with internal wiring.
  • If the error persists after basic door and lock checks and requires control module diagnosis.

Technical Specifications

wattage 100W
component Drain Pump
resistance 20-30 ohms
part_number GAG-PUMP-12345
voltage_rating 240V AC

Common Questions

What does E16 error mean on gaggenau washing machine?

E16 indicates a door lock issue, preventing the machine from detecting if the door is securely closed.

Can I fix gaggenau washing machine E16 error myself?

Yes, you can check and reseat the door lock and ensure the door is properly aligned.

How much does it cost to fix E16 error?

The estimated repair cost for the E16 error ranges from $50 to $200 for parts only.

When should I call a technician for E16?

Call a technician if the error persists after checking the door lock or if you're uncomfortable with DIY repairs.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!