Gaggenau Oven Error E107
⚡ Quick Answer: The E107 error code on your Gaggenau oven indicates a malfunction in the self-cleaning or door lock mechanism. This error typically arises during or a... ⚠️ Difficulty Varies
What Does Error E107 Mean?
The E107 error code on your Gaggenau oven indicates a malfunction in the self-cleaning or door lock mechanism. This error typically arises during or after a self-clean cycle, resulting in the oven door remaining locked and the display showing E107. The issue may stem from a stuck door lock mechanism, a faulty lock motor, or a control board problem. If your oven is unresponsive and the door won't unlock, further inspection and repair may be necessary.
Common Symptoms:
- Occurs during or after self‑clean cycle
- Oven door fails to unlock
- Display shows E107 and oven is unresponsive
Possible Causes
- Stuck or jammed door lock mechanism (medium)
- Faulty door lock motor/actuator or related switch (medium)
- Possible control board issue affecting lock control (low)
How to Fix Error E107
DIY Fix Power reset and basic checks
- Disconnect power or turn off breaker to the oven for at least 5–10 minutes.
- Restore power and check if the E107 error clears and the door unlocks.
- If door is still locked, inspect the door lock latch for obvious jams (only if safe and accessible).
Technician Only Inspect and service door lock assembly
- Disconnect power and remove oven access panels.
- Inspect the door lock mechanism, motor/actuator, and switch for mechanical damage or failure.
- Test the door lock motor/switch with a multimeter for proper operation.
- Check the control board outputs to the door lock circuit.
- Replace the door lock assembly or control board if diagnosed as faulty.
Parts needed: Door lock mechanism/assembly, Door lock motor/actuator, Door lock switch, Control board (if necessary)
- If the door remains locked after power resets and basic checks
- If internal inspection reveals damaged wiring or components you cannot safely access
Next step
Choose the next step for E107
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E107 error mean on gaggenau oven?
E107 indicates a malfunction in the self-cleaning or door lock mechanism, preventing the oven door from unlocking.
Can I fix gaggenau oven E107 error myself?
Yes, you can try resetting the power and checking for jams in the door lock latch.
How much does it cost to fix E107 error?
Repair costs for the E107 error typically range from $150 to $600+, depending on parts and labor.
When should I call a technician for E107?
Call a technician if the door remains locked after basic checks or if you find damaged wiring.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!