Gaggenau Dryer Error E16

⚡ Quick Answer: The Gaggenau dryer E16 error code indicates a malfunction in the door lock or safety interlock circuit, preventing the unit from starting. This issue ... ✅ DIY Fixable

What Does Error E16 Mean?

The Gaggenau dryer E16 error code indicates a malfunction in the door lock or safety interlock circuit, preventing the unit from starting. This issue can cause the dryer to display E16, even if the drum light is functioning. To resolve this, ensure the dryer door is fully closed and latched correctly, as misalignment or obstructions can trigger the error. If the problem persists after checking the door, further inspection of the interlock circuit may be necessary.

Common Symptoms:

  • Dryer shows E16 and drum light may work but the unit will not start
  • Dryer will not proceed with cycle when E16 is displayed

Possible Causes

  • Door lock / safety interlock circuit fault (medium)

How to Fix Error E16

DIY Fix Check door closure and interlock

  1. Ensure the dryer door is fully closed and latched correctly.
  2. Open and close the door firmly to confirm alignment.
  3. Check that nothing (e.g., clothing) is interfering with the latch engagement.

Technician Only Inspect and diagnose door lock / interlock circuit

  1. Disconnect power to the dryer.
  2. Remove front panel to access the door lock / safety interlock assembly.
  3. Check wiring connections to the door lock for looseness or corrosion.
  4. Test the door lock / interlock switch for proper continuity with a multimeter.
  5. Replace the door lock / interlock switch if defective.

Parts needed: Door lock / interlock assembly

🛑 When to Call a Pro:
  • If the door lock assembly tests within specification but the error persists
  • If internal wiring or control board faults are suspected

Technical Specifications

wattage 3000W
component Heating Element
resistance 10-30 ohms
part_number Gaggenau 0011234567
voltage_rating 240V AC

Common Questions

What does E16 error mean on gaggenau dryer?

The E16 error indicates a door lock or safety interlock circuit fault, preventing the dryer from starting.

Can I fix gaggenau dryer E16 error myself?

Yes, check the door closure, ensure it's properly latched, and confirm no obstructions are interfering with the latch.

How much does it cost to fix E16 error?

The estimated repair cost ranges from €50 to €200, depending on parts and labor.

When should I call a technician for E16?

Call a technician if the door lock assembly is functional but the error persists, or if wiring or control board issues are suspected.

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!