Gaggenau Dishwasher Error E16
⚡ Quick Answer: The E16 error code on your Gaggenau dishwasher indicates an issue with the water inlet valve. This error typically arises when the dishwasher detects ... ✅ DIY Fixable
What Does Error E16 Mean?
The E16 error code on your Gaggenau dishwasher indicates an issue with the water inlet valve. This error typically arises when the dishwasher detects water flow even when the valve should be closed, leading to a failure to fill or unusual sounds during operation. Symptoms include the error appearing at the start or during the fill cycle, the dishwasher stopping or attempting to drain, and no apparent spray arm or wash action taking place.
Common Symptoms:
- Error appears at start or during fill cycle
- Dishwasher stops and may attempt to drain
- Code shown without obvious spray arm or wash action
Possible Causes
- Inlet valve not closing or defective (allows water flow when it should be off) (medium)
- Flow sensor/flow meter giving false signal (medium)
How to Fix Error E16
DIY Fix Basic checks and resets
- Turn off dishwasher and shut off water supply
- Check that the water inlet hose is properly connected and not kinked
- Turn the water supply back on and restart the dishwasher
- If the error persists after a restart/reset, note that a power reset alone may not clear sensor/valve faults
Technician Only Inspect and replace inlet valve or flow sensor
- Disconnect power and water
- Remove access panels to reach inlet valve and flow sensor
- Test inlet valve for proper closure and coil resistance per manufacturer specs
- Test flow sensor for correct signals during fill cycle
- Replace faulty inlet valve or flow sensor as needed and retest dishwasher operation
Parts needed: water inlet valve, flow sensor/flow meter
- If internal components such as inlet valve or flow sensor need testing due to potential water entry or safety concerns
- If dishwasher repeatedly displays E16 despite user‑level checks
Next step
Choose the next step for E16
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E16 error mean on gaggenau dishwasher?
E16 indicates a problem with the water inlet valve, causing flow issues.
Can I fix gaggenau dishwasher E16 error myself?
Yes, you can perform basic checks like ensuring the water inlet hose is connected and not kinked.
How much does it cost to fix E16 error?
Repair costs for the E16 error range from $50 to $200+ for parts, depending on the model.
When should I call a technician for E16?
Call a technician if the E16 error persists after user checks or if internal components need testing.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!