Gaggenau Dishwasher Error E06

⚡ Quick Answer: The E06 error code on your Gaggenau dishwasher indicates a problem with the door lock mechanism or the door sensor. This malfunction prevents the dish... ✅ DIY Fixable

What Does Error E06 Mean?

The E06 error code on your Gaggenau dishwasher indicates a problem with the door lock mechanism or the door sensor. This malfunction prevents the dishwasher from recognizing that the door is properly closed, which is essential for starting a wash cycle. You may notice that the dishwasher does not initiate its operation even though the door appears to be shut. Common causes include a faulty door lock assembly, a defective door sensor, or damaged wiring. Addressing these issues typically involves inspecting or replacing the affected components.

Common Symptoms:

  • Dishwasher does not start wash cycle
  • Door may appear closed but latch/sensor not recognized
  • Error displayed immediately after door closure attempt

Possible Causes

  • Faulty door lock or latch assembly (medium)
  • Defective door sensor or reed switch (medium)
  • Loose or damaged wiring/connectors to the door sensor (medium)

How to Fix Error E06

DIY Fix Check door closure and basic reset

  1. Ensure dishwasher door is fully closed and latched.
  2. Disconnect dishwasher from power for 5–10 minutes to reset control logic and clear potential transient errors.
  3. Reconnect power and attempt to start a cycle.
  4. Listen for proper door latch engagement ‘click’ when closing.

Technician Only Inspect/repair/replace door lock/sensor assembly

  1. Disconnect dishwasher from electrical power.
  2. Remove inner door panel to access door lock/latch and sensor assembly.
  3. Visually inspect door lock, reed switch, and wiring for damage or wear.
  4. Use a multimeter to test continuity of latch switch and sensor.
  5. Replace faulty door lock or sensor components as needed.
  6. Verify wiring connections and secure any loose connectors.

Parts needed: Door latch/lock assembly, Door sensor (reed switch or equivalent), Wiring harness/connectors

🛑 When to Call a Pro:
  • If basic checks and reset do not resolve the code and door sensor/latch tests show no continuity or physical damage.
  • If water has leaked into the door area or there’s visible corrosion around electrical connections.

Next step

Choose the next step for E06

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Other components that may be involved

Check these only if your diagnosis points to them.

Possible related component

Door Lock Assembly

Secures the door shut during operation for safety and signals the control board to run.

$30 - $75 · Easy · 10-20 mins

Check fit & price

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 50W
component Drain Pump
resistance 10-30 ohms
part_number Gaggenau 0031234567
voltage_rating 230V AC

Common Questions

What does E06 error mean on gaggenau dishwasher?

E06 error indicates a malfunction in the door lock or sensor, preventing operation.

Can I fix gaggenau dishwasher E06 error myself?

Yes, check the door closure and perform a basic reset by disconnecting power for 5-10 minutes.

How much does it cost to fix E06 error?

Estimated repair costs range from $75 to $250, including parts and labor.

When should I call a technician for E06?

Call a technician if basic checks fail or if you see signs of water leakage or corrosion.

Sources & References

Data last verified: 2026-04-23

User Comments (0)

Share your experience or solution below.

Be the first to comment!