Fujitsu General Air Conditioner Wi Fi Control Error 1300

⚡ Quick Answer: The Fujitsu General air conditioner Wi-Fi control error 1300 indicates a communication failure with the Wi-Fi module. This can result in the unit bein... ✅ DIY Fixable

What Does Error 1300 Mean?

The Fujitsu General air conditioner Wi-Fi control error 1300 indicates a communication failure with the Wi-Fi module. This can result in the unit being unresponsive to remote commands or displaying connection errors. To resolve this issue, ensure your mobile device is connected to the same Wi-Fi network as the air conditioner, verify that your wireless router is powered on and configured correctly for 2.4 GHz, and restart both your router and the FGLAir app before attempting to reconnect.

Possible Causes

  • Wi-Fi module failure
  • Router connectivity issues
  • Firmware mismatch

How to Fix Error 1300

DIY Fix Basic Wi‑Fi connection and setup verification

  1. Ensure your smartphone/tablet is connected to the same Wi‑Fi network intended for the air conditioner control. [Fujitsu General Australia](
  2. Verify the wireless router is powered on and configured for 2.4 GHz b/g/n (FGLAir needs 2.4 GHz). [Fujitsu General Australia](
  3. Restart your router and FGLAir app and try re‑connecting. [Fujitsu General Australia](
  4. If the error appeared during setup, ensure the Wi‑Fi module has adequate signal and that setup is not closed prematurely.

Technician Only Wi‑Fi adapter and network environment inspection

  1. Check the physical Wi‑Fi module (if external) for proper installation and LED status per FGLAir manual.
  2. Confirm the Wi‑Fi module is within appropriate range of the router and has a stable signal.
  3. Use diagnostic mode or app log retrieval to capture detailed error logs for submission to Fujitsu support.
  4. Test connection with a simple network setup (e.g., mobile hotspot) to isolate local network issues.

Parts needed: Wi‑Fi adapter/module, Wireless router/network equipment

🛑 When to Call a Pro:
  • If Wi‑Fi setup fails repeatedly despite verifying network settings and signal strength, contact Fujitsu General support or a qualified HVAC technician for diagnosis.
  • If the FGLAir Wi‑Fi adapter LED indicates a hardware fault (e.g., specific blinking fault pattern) during troubleshooting.

Technical Specifications

wattage N/A
component Wi-Fi Module
resistance N/A
part_number FJ-WIFI-MOD-001
voltage_rating DC 5V

Common Questions

What does 1300 error mean on fujitsu general air conditioner wi fi control?

Error 1300 indicates a communication failure with the Wi-Fi module.

Can I fix fujitsu general air conditioner wi fi control 1300 error myself?

Yes, verify your Wi-Fi connection, check router settings, and restart devices.

How much does it cost to fix 1300 error?

Repair costs vary, typically minimal unless module replacement is required.

When should I call a technician for 1300?

Contact a technician if issues persist after troubleshooting or if hardware faults are indicated.

Sources & References

Data last verified: 2026-07-01

User Comments (0)

Share your experience or solution below.

Be the first to comment!