Whirlpool Washer Dryer: noisy during spin cycle

Professional Repair Guide

What is this symptom?

Is your Whirlpool washer dryer making loud noises during the spin cycle? This issue often arises from unbalanced loads or improper distribution of laundry. You may hear banging, grinding, or rumbling sounds, indicating something is not right. Addressing this symptom promptly can prevent further damage and ensure efficient operation.

Urgency: Medium

Important Tips for Whirlpool Models

  • Whirlpool official documentation highlights unbalanced loads and foreign objects as common noise sources
  • Clunk noise when drive system shifts between modes is normal

Possible Causes

Unbalanced load or improper distribution of laundry

How to Identify: Loud banging/thumping coincides with uneven clothing distribution or heavy items on one side; machine vibrates or rocks

Part: Drum/Load

Loose components (drum screws, mountings)

How to Identify: Intermittent rattling that may be fixed by tightening components

Part: Internal mounting hardware

DIY Solutions

Redistribute and balance laundry load

Easy 2–5 minutes
  1. Pause the cycle and open washer
  2. Re-distribute clothes evenly around the drum, mixing heavy and light items
  3. Close the lid and restart the spin cycle
⚠️ Safety First: Ensure machine is stopped before opening lid

Check inside drum for foreign objects

Moderate 10–15 minutes
  1. Stop and unplug the washer
  2. Inspect drum interior and around door seal for loose items
  3. Remove any objects found and run a short spin to test
⚠️ Safety First: Disconnect power before inspecting drum to avoid injury

Level the machine

Moderate 10–20 minutes
Tools Needed: Bubble level, Wrench or pliers
  1. Place a level on top of washer front-to-back and side-to-side
  2. Adjust the leveling feet until washer is stable and level
  3. Tighten feet to secure position
⚠️ Safety First: Ensure washer is unplugged while adjusting feet

Professional Repairs

Replace drum bearings and seals

Estimated Cost: $150 - $400

Replace suspension or shock absorbers

Estimated Cost: $100 - $300

Motor coupling/drive belt replacement

Estimated Cost: $80 - $250

When to Call a Professional

Noise persists despite load balancing and debris removal
Grinding noise continues and drum feels rough when rotated manually
Excessive vibration remains after leveling and shock absorber replacement attempts
Any signs of burning smell or visible damage to internal components

Preventive Maintenance

  • Load laundry evenly and avoid overloading: Unbalanced spin vibration and noise
    Frequency: Each use
  • Periodically check drum for foreign objects: Rattling noise and potential drum damage
    Frequency: Monthly
  • Level machine after relocation: Excessive vibration and banging
    Frequency: Whenever moved

Frequently Asked Questions

Why is my Whirlpool Washer Dryer noisy during spin cycle?
Commonly due to an unbalanced load or improper distribution of laundry.
How do I fix Whirlpool Washer Dryer noisy during spin cycle myself?
You can redistribute the laundry, check for foreign objects, or level the machine.
How much does it cost to fix noisy during spin cycle?
Professional repairs can range from $80 to $400 depending on the issue.
When should I call a technician for noisy during spin cycle?
Call a technician if the noise persists after DIY fixes or if you suspect damaged components.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

70%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Worn or damaged support rods
  • Loose or damaged drum bearings
  • Foreign objects caught in the drum or pump

User Suggested Solutions

  1. Inspect and replace worn or damaged support rods. To do this, unplug the washer dryer, remove the back panel, and check the condition of the support rods. If they are worn, replace them with new ones.

  2. Check and replace the drum bearings. This involves removing the drum, which can be complex. If the bearings are worn or damaged, replace them with new ones.

  3. Inspect the drum for foreign objects. Open the door and check for any items that may have fallen into the drum or pump. Remove any visible debris.

Analysis based on 1 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Whirlpool Thin Twin Washer/Dryer LTE5243DQ3 washing machine ...

Community Discussions

makes an increasingly loud noise described as rattling or buzzing during spinning

Replace support rods

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!