None Washing Machine: not draining

Professional Repair Guide

What is this symptom?

Is your washing machine filling up with water but failing to drain after the wash cycle? This common issue can leave standing water in the tub. Potential causes include a clogged drain hose, lint filter, or even a faulty drain pump. Understanding these issues can help you troubleshoot effectively.

Urgency: Medium

Possible Causes

Clogged or obstructed drain hose

How to Identify: Water remains after cycle; visible bends/kinks or debris in hose; slow water evacuation.

Part: Drain hose

Clogged lint/trap filter (especially in drum machines)

How to Identify: Water doesn’t drain; debris caught in removable filter near pump area.

Part: Lint filter / trap filter

Drain trap or household plumbing obstruction

How to Identify: Water backs up into washing machine or drains slowly in other fixtures too.

Part: Home drain trap/plumbing

Faulty drain pump motor

How to Identify: No pump sound during drain cycle, error codes related to pump; power to pump confirmed.

Part: Drain pump motor

DIY Solutions

Check and straighten drain hose

Easy 10-20 minutes

Tools Needed: gloves, bucket

Unplug washer and pull away from wall
Inspect drain hose for kinks, bends or visible debris
Straighten hose, remove large obstructions by hand or with water flush
Reposition hose according to manufacturer height guidelines

⚠️ Safety First: Disconnect power before working near electrical components

Clean lint/trap filter (if accessible)

Moderate 15-30 minutes

Tools Needed: towel, bucket, screwdriver (if needed)

Unplug machine and locate lint or trap filter access panel
Place towel and bucket under filter area
Unscrew filter cap and remove debris by hand
Flush filter with water and reinstall securely

⚠️ Safety First: Expect residual water discharge; catch with bucket/towel.

Clear drain pump filter

Moderate 15-30 minutes

Tools Needed: bucket, gloves, screwdriver

Unplug the washer and open pump filter cover
Place bucket under filter to catch water
Unscrew and remove filter, clear debris
Replace filter and run a short cycle to test drainage

⚠️ Safety First: Risk of significant water spill; prepare floor protection.

Next step

Choose the next step for not draining

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Hose

Carries waste water from the drain pump to your home's standpipe or sink drain.

Typical part-only price: $15 - $30
DIY difficulty: Easy
Estimated time: 15-30 mins

Optional: enter your model number

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

$35 - $80 · Easy · 15-30 mins

Check fit & price

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Internal pump replacement

Estimated Cost: $80 - $200

Plumbing drain line unclogging

Estimated Cost: $100 - $250

When to Call a Professional

No improvement after DIY cleaning of hose/filter/pump

Pump humming without draining or error codes pointing to pump failure

Suspected household drain plumbing blockage causing backup

Water leakage during troubleshooting

Preventive Maintenance

Regularly clean lint/trap filter: Filter clogs that hinder drainage
Frequency: every 1-2 months
Inspect and straighten drain hose: Hose kinks and blockages
Frequency: every 3-6 months
Check household drain line health: Plumbing backups affecting washer drainage
Frequency: annually

Frequently Asked Questions

Why is my Any Washing Machine not draining?

Common causes include a clogged drain hose, lint filter, or a faulty drain pump.

How do I fix Any Washing Machine not draining myself?

Check the drain hose for kinks, clean the lint filter, and clear the drain pump filter.

How much does it cost to fix not draining?

Professional repairs range from $80 to $250 depending on the issue.

When should I call a technician for not draining?

If DIY solutions don't work or if the issue is complex, consider contacting a technician.

References & Sources

Washing Machine Not Draining Solutions Community

Community Analytical Insights

Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions

Can I Fix This Myself?

65%

DIY Success Rate Difficulty: DIY

Common Issues Reported by Users

Drain pump failure (8 mentions)
Clogged drain hose (4 mentions)
Lid switch malfunction (3 mentions)
Wiring issues (3 mentions)

User Suggested Solutions

Replace the drain pump
Check and clear clogs in the drain hose
Inspect and replace the lid switch
Reconnect or replace faulty wiring

Analysis based on 136 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

Community Discussions

Washer stopped at rinse cycle, didn’t drain and has burning smell

Turn off the breaker, unplug the washer once it cools, manually drain the water, and remove the towels.

DIY View on Reddit →

Washer stopped with 1 minute left, wouldn't open, stopped 3 minutes into the cycle, displaying 'PAU', not draining

Replacing the door lock should resolve the issue.

DIY View on Reddit →

washer broke during spin cycle, water remaining in machine

Use a wet/dry vacuum or siphon pump to remove remaining water.

DIY View on Reddit →

filter jams up, washer can't drain

Consider bypassing the sink and connecting directly to the plumbing stack.

Pro needed View on Reddit →

stopped draining

Replacing the drain pump may resolve the issue.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!

None Washing Machine: not draining

What is this symptom?

Possible Causes

Clogged or obstructed drain hose

Clogged lint/trap filter (especially in drum machines)

Drain trap or household plumbing obstruction

Faulty drain pump motor

DIY Solutions

Check and straighten drain hose

Clean lint/trap filter (if accessible)

Clear drain pump filter

Choose the next step for not draining

Drain Hose

Other parts options

Drain Pump

Model-compatible Washing Machine parts

Maintenance supplies

Washing Machine Cleaner Tablets

Braided Washer Inlet Hoses

Washer Drain Hose Holder

Professional Repairs

Internal pump replacement

Plumbing drain line unclogging

When to Call a Professional

Preventive Maintenance

Frequently Asked Questions

References & Sources

Community Analytical Insights

Can I Fix This Myself?

Common Issues Reported by Users

User Suggested Solutions

Replace the drain pump

Check and clear clogs in the drain hose

Inspect and replace the lid switch

Reconnect or replace faulty wiring

Community Discussions

User Comments (0)