None Washing Machine: not draining, broken lid lock, making clicking sounds
What is this symptom?
Is your washing machine not draining, experiencing a broken lid lock, or making clicking sounds? These issues can indicate a blocked drain filter, a faulty lid lock switch, or a failing drain pump. Understanding these symptoms can help you troubleshoot effectively and restore your appliance's functionality.
Possible Causes
Drain filter or hose blockage
How to Identify: Water remains in tub after cycle, visible debris in filter, hose kinked or clogged
Part: Drain filter, drain hose
Faulty lid/door lock switch
How to Identify: Clicking noise when trying to start, lid does not lock, cycle won’t start/continue
Part: Lid lock mechanism / switch
Drain pump failure or seizure
How to Identify: No drain action despite clear hose/filter, buzzing or clicking from pump area
Part: Drain pump motor
DIY Solutions
Clean drain filter and hose
- Turn off & unplug washer
- Locate and remove drain filter cover
- Drain residual water into bucket
- Clean filter and check hose for obstructions
- Reinstall parts and test drain
Test and temporarily bypass lid switch
- Unplug machine and access lid switch
- Use multimeter to check continuity when actuated
- If faulty, consider temporary bypass (per safe guidance) to test
- Replace the switch if confirmed faulty
Next step
Choose the next step for not draining, broken lid lock, making clicking sounds
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
- Typical part-only price
- $15 - $30
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace drain pump assembly
Replace lid lock mechanism
When to Call a Professional
Preventive Maintenance
-
Clean drain filter: Drain clogs
Frequency: monthly -
Inspect drain hose for kinks and debris: Drain failure
Frequency: monthly -
Test lid lock operation: Unexpected lock failures
Frequency: annually
Frequently Asked Questions
Why is my Any Washing Machine not draining, broken lid lock, making clicking sounds?
How do I fix Any Washing Machine not draining, broken lid lock, making clicking sounds myself?
How much does it cost to fix not draining, broken lid lock, making clicking sounds?
When should I call a technician for not draining, broken lid lock, making clicking sounds?
References & Sources
- Washing Machine Not Draining Causes and Fixes Repair-Blog
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Clogged drain pump or hose preventing water from draining
- Broken lid lock mechanism causing the machine to halt mid-cycle
- Faulty motor or motor control board leading to clicking sounds and operational issues
User Suggested Solutions
-
Check and clear any clogs in the drain pump and hose. Disconnect the washing machine from power, remove the drain hose, and inspect for blockages. Clean out any debris and reassemble.
-
Inspect and replace the broken lid lock. Open the top panel of the washing machine, locate the lid lock, and test it with a multimeter. If faulty, replace it with a new one.
-
Check the motor and motor control board for faults. If the clicking sounds persist, test the motor with a multimeter and replace it if necessary. Consult the user manual for specific replacement instructions.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!