None Washing Machine: loud noise during draining
What is this symptom?
Experiencing a loud noise during the drain cycle of your washing machine? Unusual sounds like banging or rattling can indicate issues such as a foreign object in the drain pump or a clogged drain hose. Identifying the root cause is essential to restore normal operation.
Possible Causes
Foreign object in drain pump or pump filter
How to Identify: Noise only during drain, intermittent rattling; inspect pump filter for coins, debris; noises may stop after partial clearing
Part: Drain pump / pump filter
Clogged or obstructed drain hose
How to Identify: Noise during drain with slow draining; possible water gurgling sounds; disconnect hose to check blockage
Part: Drain hose
Worn or damaged drain pump impeller
How to Identify: Loud continuous grinding during drain, no obvious debris; noise persists after removing debris; pump impeller may be cracked
Part: Drain pump impeller
Loose or worn pump mounting or internal pulley
How to Identify: Vibration or banging noise; inspect pump mount and pulley alignment; noise may change with load
Part: Pump mount / pulley
Normal air/water flow sounds (not a fault)
How to Identify: Sound like gurgling or "gobo"‘bo" without other symptoms; machine otherwise functions normally
Part: Drain valve / airflow
DIY Solutions
Clear drain pump filter and remove debris
- Unplug the washer and locate the drain pump filter access (often at front bottom).
- Place towels and a shallow container to catch water, open filter cover.
- Unscrew and remove the filter, clear out debris (lint, coins), inspect for objects.
- Replace filter, tighten securely, plug in and test drain cycle.
Check and clear drain hose obstruction
- Turn off and unplug the washer, disconnect the drain hose from the washer and drain standpipe.
- Check for kinks or visible clogs in hose, flush with water or push soft object to clear obstruction.
- Reattach hose without sharp bends, ensure proper height/position.
- Run a drain cycle to verify noise reduction.
Next step
Choose the next step for loud noise during draining
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace damaged drain pump or impeller
Realign or secure pump mounting/pulley system
When to Call a Professional
Preventive Maintenance
-
Clean pump filter regularly: Debris buildup causing noise and clogs
Frequency: monthly -
Inspect drain hose position and condition: Hose blockages and abnormal drain sounds
Frequency: every 3 months
Frequently Asked Questions
Why is my Any Washing Machine loud noise during draining?
How do I fix Any Washing Machine loud noise during draining myself?
How much does it cost to fix loud noise during draining?
When should I call a technician for loud noise during draining?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Worn or damaged motor coupler
- Clogged drain pump or hose
- Loose or damaged drive belt
User Suggested Solutions
-
Inspect and replace the motor coupler: Unplug the washing machine, remove the access panel, disconnect the motor, and replace the motor coupler if damaged.
-
Clear the drain pump and hose: Disconnect the washing machine from power, remove the drain hose, and check for clogs in the pump and hose. Clean thoroughly before reassembling.
-
Check and replace the drive belt: Unplug the machine, remove the cabinet, and inspect the drive belt for wear or damage. Replace if necessary.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
Crazy washing machine noise during draining cycle
Bad motor coupler.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!