None Washing Machine: excessive vibration
What is this symptom?
Experiencing excessive vibration in your washing machine? This issue, particularly during spin cycles, presents as strong shaking, noise, and even movement across the floor. Commonly caused by an unbalanced load, this problem can disrupt your laundry routine and may lead to further damage if left unresolved.
Possible Causes
Unbalanced (Uneven) Load
How to Identify: Large items (e.g., towels, blankets clustered on one side; vibration decreases or stops when load is redistributed evenly.
Part: Drum/load distribution
DIY Solutions
Redistribute Laundry Load
- Stop the cycle and open the washer door.
- Rearrange clothes so weight is evenly distributed around the drum.
- Remove or add items to avoid extremely light or heavy imbalance.
Level the Washing Machine
- Place a bubble level on top of the washer to check its level.
- Adjust the leveling feet by turning clockwise/counter‑clockwise until the washer is level.
- Double‑check all four feet make firm contact with the floor.
Use Anti‑Vibration Mats or Pads
- Place anti‑vibration pads beneath each foot or an anti‑vibration mat beneath the washer.
- Ensure the pads/mat sit flat and support machine weight.
- Run a test cycle to see reduction in vibration.
Remove Shipping Bolts (New Installation)
- Locate shipping bolts on rear of washer.
- Using a wrench, loosen and remove all bolts securing drum for transport.
- Store bolts safely for future moves.
Next step
Choose the next step for excessive vibration
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Browse by model — no specific failed part is claimed
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Search results are not a diagnosis. Verify both the complete appliance model and the retailer's fit information before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace Worn Suspension/Shock Absorbers
Internal Drum Bearing Replacement
When to Call a Professional
Preventive Maintenance
-
Periodically check and adjust leveling feet: Vibration due to improper leveling
Frequency: quarterly -
Ensure even laundry distribution for each load: Unbalanced load vibration
Frequency: every wash
Frequently Asked Questions
Why is my Any Washing Machine excessive vibration?
How do I fix Any Washing Machine excessive vibration myself?
How much does it cost to fix excessive vibration?
When should I call a technician for excessive vibration?
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Improper leveling of the washing machine (5 mentions)
- Worn or loose parts (snubber ring, motor mounts, springs) (3 mentions)
- Shipping bolts not removed (2 mentions)
User Suggested Solutions
-
Ensure the washing machine is level with all feet in firm contact with the floor.
-
Check for and remove shipping bolts.
-
Inspect and replace worn parts such as the snubber ring or motor mounts.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
- Is this too much vibrating from a brand new washing machine?
- Buying front load laundry for second floor
- LG Washing Machine Vibrates
- Washing Machine Vibration
- Loading a Front-Load Washing Machine
- Vibration problem in an Admiral Washing Machine Model: AAV70...
- OK to bolt down a top-loading washing machine?
- LG Washing Machine vibrating and shaking - WD14024D6
- Fairly new LG washing machine vibrating like mad
Community Discussions
vibration during spin cycle
Premium front load washers like Electrolux and Maytag have better vibration reduction systems.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!