None Washer Dryer: error code E33
What is this symptom?
If your washer dryer displays error code E33, it typically indicates a fault in the sensor or interlock system. This can affect water level detection, pressure sensing, drum rotation, or door locking mechanisms, leading to interrupted cycles and operational issues.
Important Tips for None Models
- E33 relates to pressure system or heater interlock fault specific to Electrolux washer‑dryers.
- E33 may indicate inconsistent pressure system/water level signals in Midea washer‑dryers.
- Some GE washers report E33 as spin speed sensor or water level calibration error.
- Bush washer‑dryer E33 reported as door lock malfunction in community case.
Possible Causes
Pressure sensor / water level sensor fault
How to Identify: Machine stops with water remaining in drum or incorrect water level detection; error E33 persists after reset.
Part: Pressure switch / water level sensor
Control board or wiring fault
How to Identify: Error persists despite checking sensors; visible damage to board or loose connectors.
Part: Main control board / wiring harness
DIY Solutions
Reset machine and re‑level
- Unplug the washer‑dryer for 5 minutes to clear error codes.
- Ensure the machine is level and stable.
- Plug back in and restart a cycle.
Check and clean door lock/latch
- Open the door and inspect latch area for debris.
- Clean lock and strike with a dry cloth or brush.
- Close door firmly and restart machine.
Inspect pressure hose and sensor connection
- Unplug machine and remove access panel.
- Locate pressure hose from tub to pressure sensor; check for kinks or blockages.
- Ensure sensor connector is seated; reconnect if loose.
- Reassemble and test.
Next step
Choose the next step for error code E33
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washer Dryer parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dryer Vent Cleaning Kit
Helps remove routine lint buildup from an accessible dryer vent path. It does not diagnose or repair an E-code or failed component.
Lint Trap Cleaning Brush
A narrow brush for routine cleaning around an accessible lint screen and housing.
Dryer Vent Hose Kit
A replacement exhaust duct option for visibly crushed or damaged external venting. Check diameter, length, local code, and installation clearance.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Professional Repairs
Replace pressure/water level sensor
Replace spin speed/drum sensor
Replace door lock assembly
Control board diagnostics/repair
When to Call a Professional
Preventive Maintenance
-
Clean door lock and gasket: Door contact issues that can trigger sensor errors
Frequency: monthly -
Inspect and clear pressure hose path: Blockages causing incorrect water level readings
Frequency: quarterly
Frequently Asked Questions
Why is my Any Washer Dryer error code E33?
How do I fix Any Washer Dryer error code E33 myself?
How much does it cost to fix error code E33?
When should I call a technician for error code E33?
References & Sources
Community Analytical Insights
Guidance from available sources; statistical claims are shown only for samples of at least 10 discussions
Common Issues Reported by Users
- Faulty water level sensor
- Heating element malfunction
- Control board issue
User Suggested Solutions
-
Check and replace the water level sensor. Disconnect power, locate the sensor (usually near the bottom of the washer), and test it with a multimeter. If faulty, replace it with a new one.
-
Inspect the heating element for continuity. Unplug the washer, access the heating element (usually located at the back), and test it with a multimeter. Replace if necessary.
-
Reset the control board. Unplug the washer for 5-10 minutes to reset the system. If the error persists, further diagnosis may be needed.
Limited-source guidance; percentages and success-rate claims are not shown
View
Sources
Data compiled from real discussions on r/appliancerepair and r/Appliances:
Community Discussions
E33 error code
Possible issues with water level sensor or heating element; resetting the machine may help.
Source: Reddit r/appliancerepair
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!