Thermador Gas Oven: not igniting

Possible Causes

Faulty ignition system (igniter or spark components)

How to Identify: No spark or weak spark present when attempting ignition; clicking sound without ignition; visible damage or corrosion on electrodes.

Part: Igniter / Spark Electrode / Spark Ignition Switch / Spark Module

Clogged or dirty burner ports and ignition parts

How to Identify: Food crumbs, grease, or debris visible around burner ports or ignition electrode; cleaning improves or restores spark/ignition.

Part: Burner ports, burner caps, igniter surface

Gas supply issues

How to Identify: No gas flow detectable, other burners also fail; ensure gas valve fully open; smell of gas without ignition.

Part: Gas valve / gas line

Control module or wiring malfunction

How to Identify: Neither igniters nor switches respond; no clicking sounds; visible signs of control board damage or electrical faults.

Part: Control board / wiring harness

DIY Solutions

Clean ignition and burner components

Moderate 15-30 minutes

Tools Needed: soft brush, toothpick, cotton swabs

1. Ensure the oven is turned off and cool.
2. Remove any removable burner caps and gently clean debris from burner ports and ignition electrodes with a soft brush.
3. Use a toothpick or cotton swab to clear small clogs around ignition points.
4. Reassemble and test ignition.

⚠️ Safety First: Turn off power and gas supply before cleaning.

Check gas valve and supply

Easy 5-10 minutes

Tools Needed: none

1. Confirm the main gas shutoff valve to the oven is fully open.
2. Check if other gas appliances are operating to verify gas supply.
3. Ensure no strong gas odor persists; if there is, ventilate the area and do not attempt ignition.

⚠️ Safety First: If you smell strong gas, stop and ventilate; seek professional help immediately.

Next step

Choose the next step for not igniting

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Spark Igniter

Generates a spark to light the gas burner in gas heating appliances.

Typical part-only price

$15 - $40

DIY difficulty

Easy

Estimated time

15-30 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Spark Ignition Module

Supplies high-voltage pulses to the burner igniter electrodes during ignition.

$45 - $160 · Medium · 30-60 mins

Check fit & price

Possible related component

Gas Burner Cap

Distributes flame evenly over a gas burner head and must match the burner size and model.

$15 - $60 · Easy · 5 mins

Check fit & price

Possible related component

Gas Valve

Controls the flow of natural gas or propane to the burner jets.

$60 - $140 · Hard · 45-60 mins

Check fit & price

Model number required

Model-compatible Gas Oven parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Replace igniter or ignition components

Estimated Cost: $50 - $250

Inspect and repair gas line or control board

Estimated Cost: $150 - $500+

When to Call a Professional

If there is a smell of gas without ignition that persists after ventilation

If spark is absent despite cleaning electrodes and burner ports

If there are signs of electrical faults or control board damage

If you are uncomfortable working with gas appliance components

Preventive Maintenance

• Regularly clean burner ports and ignition electrodes: Prevents debris buildup that can block ignition
  Frequency: Monthly or as needed
• Annual professional inspection: Identifies early wear on ignition components and gas supply issues
  Frequency: Annually

Frequently Asked Questions

Why is my Thermador Gas Oven not igniting?

Common causes include a faulty ignition system, clogged burner ports, or gas supply issues.

How do I fix Thermador Gas Oven not igniting myself?

Clean ignition and burner components, and check the gas valve to ensure it's open.

How much does it cost to fix not igniting?

Repair costs range from $50 to $500+, depending on whether parts need replacement or more extensive repairs are needed.

When should I call a technician for not igniting?

Call a technician if basic troubleshooting doesn't resolve the issue or if you suspect a gas leak.

References & Sources

• Thermador Gas Cooktops & Rangetops Troubleshooting Official
• Thermador Range Burner Not Igniting: Troubleshooting Tips Community

Common Issues Reported by Users

• Faulty ignitor (2 mentions)
• Defective control board (1 mentions)

User Suggested Solutions

1. Replace ignitor and fixing kits

2. Replace ignition device and control board

Community Discussions

left side burners not working

Parts replacement including fixing kits and ignitor.

DIY View on Reddit →

Source: Reddit r/appliancerepair