Speed Queen Washing Machine: not heating

Possible Causes

Incorrect cycle setting (eco/cold-only)

How to Identify: Selected cycle may be set to cold or eco mode which uses only cold water and does not call for hot water.

Part: Cycle selection

DIY Solutions

Verify hot water cycle selection

Easy 2–5 minutes

1. Check the washer’s control panel and confirm a hot wash cycle is selected (not eco/cold-only).
2. Restart the cycle with the correct setting and observe if hot water enters the machine.

Check hot water supply and inlet screens

Moderate 10–30 minutes

Tools Needed: Adjustable wrench, Bucket, Small brush

1. Turn off the water supply valves to the washer.
2. Disconnect the hot water hose from the back of the washer.
3. Check the hose and inlet screen for debris; clean screens with brush if blocked.
4. Reattach the hose, open water supply, and run a hot cycle to test.

⚠️ Safety First: Ensure water supply is off before disconnecting hoses

Next step

Choose the next step for not heating

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Diagnostic aid

Optional aid — no replacement part was confirmed

Appliance Repair Tool Kit

Standard diagnostic and repair tool kit for major household appliances.

No purchase link is shown because the diagnosis is not specific enough to recommend a product.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Professional Repairs

Replace faulty water inlet valve assembly

Estimated Cost: $80 - $200

Replace temperature sensor or selector switch

Estimated Cost: $60 - $180

When to Call a Professional

If hot water supply tests fine and DIY inlet screen cleaning does not resolve the issue

If multimeter testing indicates a faulty inlet valve, sensor or control switch

If internal components require disassembly beyond homeowner comfort

Preventive Maintenance

• Clean inlet screens: Blockage of hot and cold water flow
  Frequency: annually
• Verify cycle selections before each use: Incorrect temperature fills
  Frequency: each wash

Frequently Asked Questions

Why is my Speed Queen Washing Machine not heating?

The most common causes are incorrect cycle settings or issues with the hot water supply.

How do I fix Speed Queen Washing Machine not heating myself?

Verify the hot water cycle is selected and check the hot water supply and inlet screens for blockages.

How much does it cost to fix not heating?

Professional repairs can range from $60 to $200, depending on the issue.

When should I call a technician for not heating?

If DIY solutions don’t resolve the issue or if you're uncomfortable performing repairs, it's time to call a technician.

User Suggested Solutions

Community Discussions

looking for a basic top loader washer

Consider used Speed Queen or Amana top loaders; Whirlpool/Kenmore direct drive models are also recommended.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair