Speed Queen Washing Machine: not completing cycle

Professional Repair Guide

What is this symptom?

Is your Speed Queen washing machine not completing its cycle? This issue may manifest as the machine stopping mid-wash, mid-rinse, or mid-spin. Common causes include unbalanced loads, a faulty lid switch, drain pump issues, control board malfunctions, or excessive suds. Understanding these factors can help pinpoint the problem and restore your washing machine to proper function.

Urgency: Medium

Possible Causes

Unbalanced load causing cycle interruption

How to Identify: Machine pauses or stops after agitation before spin; load feels uneven inside drum

Part: Load distribution sensors / imbalance detection

Faulty lid switch assembly preventing cycle progression

How to Identify: Top‑load washer lights on control panel may show no lid closed; cycle stops often before spin or drain stages

Part: Lid switch assembly

Drain pump issue leading to failure to drain and complete cycles

How to Identify: Water remains in tub; cycle stalls at drain or before spin; sometimes error codes if digital interface present

Part: Drain pump

Control board or timer malfunction interrupting cycles

How to Identify: Machine stops unpredictably at different cycle stages; visual signs of damage to electronics may be present

Part: Main control board / timer module

Excessive suds or foam causing repeated rinse/overflow behavior

How to Identify: Foam overflowing or extended rinse behavior; machine appears to restart rinse/overflow loops

Part: User detergent choices and sensors

Preventive Maintenance

  • Ensure balanced loads for every wash: Unbalanced load interruptions
    Frequency: Every wash
  • Use recommended detergent amounts: Excessive suds leading to rinse/overflow loops
    Frequency: Each wash
  • Clean drain pump area periodically: Drain obstructions that can stall cycles
    Frequency: Every 3–6 months

Frequently Asked Questions

Why is my Speed Queen Washing Machine not completing cycle?
Common causes include unbalanced loads, a faulty lid switch, drain pump issues, control board malfunctions, or excessive suds.
How do I fix Speed Queen Washing Machine not completing cycle myself?
Currently, there are no DIY solutions available for this issue.
How much does it cost to fix not completing cycle?
Pricing can vary based on the specific issue and technician rates; consult a professional for an estimate.
When should I call a technician for not completing cycle?
If the problem persists or if you're unsure of the cause, it's advisable to call a technician for further diagnosis.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

50%
DIY Success Rate Difficulty: Either

Common Issues Reported by Users

  • Timer malfunction (2 mentions)

User Suggested Solutions

  1. Turn off power for a few minutes and switch to a different cycle

    Success rate: 50.0%
Analysis based on 2 community discussions
View Sources

Data compiled from real discussions on r/appliancerepair and r/Appliances:

  1. Speed Queen washer (Model LWS02NW) stopped in middle of regu...
  2. Speed Queen Washer, Won't complete on Delicate Cycle.

Community Discussions

stopped in middle of regular cycle

Turned off power for a few minutes and switched to permanent press cycle, which allowed the washer to run again.

DIY View on Reddit →

Source: Reddit r/appliancerepair

User Comments (0)

Share your experience or solution below.

Be the first to comment!