Speed Queen Washing Machine: bleach dispenser not dispensing

Professional Repair Guide

What is this symptom?

Is your Speed Queen washing machineâ€™s bleach dispenser not dispensing? This issue can lead to ineffective cleaning as bleach fails to mix with your laundry. If the dispenser is full but not releasing bleach during the wash cycle, it may be due to low water flow or blockages. Understanding the causes can help you address this problem effectively.

Urgency: Medium

Possible Causes

Inadequate water flow to the dispenser (low home water pressure or defective water inlet valve)

How to Identify: Bleach and other dispenser contents remain in dispenser; water flow into dispenser compartment appears weak; water pressure at home below ~20 psi

Part: Water inlet valve / water supply

Clogged or obstructed dispenser tray or siphon tube

How to Identify: Visible residue or buildup inside bleach compartment or siphon holes; water not flowing properly through siphon opening

Part: Dispenser tray and siphon/tubes

Preventive Maintenance

Regularly clean dispenser compartments and siphon holes: Build-up that can block bleach dispensing
Frequency: Monthly
Run occasional maintenance rinse cycles with warm water: Residue accumulation in dispenser lines
Frequency: Monthly

Frequently Asked Questions

Why is my Speed Queen Washing Machine Bleach dispenser not dispensing?

The common causes include inadequate water flow due to low pressure or a defective water inlet valve, and clogged dispenser components.

How do I fix Speed Queen Washing Machine Bleach dispenser not dispensing myself?

Currently, there are no DIY solutions recommended for this issue.

How much does it cost to fix Bleach dispenser not dispensing?

Professional repair costs can vary; it's best to consult a technician for an accurate estimate.

When should I call a technician for Bleach dispenser not dispensing?

If the issue persists or if you're unsure about the causes, it's advisable to call a technician for assistance.

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

75%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Clogged bleach dispenser nozzle or compartment
Incorrect water pressure or flow issues
Faulty dispenser solenoid valve

User Suggested Solutions

Clean the bleach dispenser nozzle and compartment. Remove the dispenser tray, rinse it under warm water, and use a soft brush to clear any clogs. Reassemble and test the machine.
Check the water supply and pressure. Ensure that the water inlet hoses are not kinked and that the water supply valves are fully open. Test the flow by running a cycle without laundry.
Inspect and replace the dispenser solenoid valve if faulty. Disconnect power, locate the valve, and test it with a multimeter. Replace it if it does not show continuity.